Vulture, the FPV Wing

thingiverse

WORK IN PROGRESS All opinions are welcome! Cura profiles available for printing in PLA or PETG. PETG is HIGHLY recommended if you live in a hot region. This is a FPV Flying Wing designed in CATIA v5 and inspired on the design of the Proteus Wing - https://www.thingiverse.com/thing:2086413 **Dimensions:** - Span - 1260 mm - Fuselage Length - 420 mm - Root Chord - 180 mm Weight of printed parts: around 600g Specs: - Wing airfoil - Martin Hepperle MH60 10.08% - Winglet airfoil - Selig S9033 7.5% - Carbon spar dimensions - 5.5 x 5.5 x 492 mm (1/5 x 1/5 x 19 1/3 inches) - The motor mount is made to accept a 2830 Brushless Outrunner motor with a 9 inches propeller 1. CG position - 258 mm from the nose Cruise speed estimated at 10-11 m/s (aprox. 23 mph or 36 km/h) 2. CG position - 250 mm from the nose Cruise speed estimated at 14-15 m/s (aprox. 31 mph or 50 km/h) ------------------------------------------------------------------------------------------------------------------------ March 12, 2019: - Uploaded version 2 of Fuselage01, Fuselage03 and RightWing01 - Fuselage01 is now printed with much less support - The spar hole was enlarged from 6mm x 6mm to 6.5mm x 6.5mm March 26,2019 - Uploaded GCODES for Fuselage01 and Hatch March 28, 2019 - Uploaded GCODES for Wing03 and Winglets - RightWing01 split in 2 pieces: FrontRightWing01 and BackRightWing01 April 13, 2019 - Major remodeling for best printing experience - Winglets enlarged - Firewall angle modified from 3º to 5º - All parts rolled to version 3 - Removed old GCODES and made cura profiles available April 17, 2019 - First prototype assembly completed