Vyper Lack Extension Leg

prusaprinters

<p>Remix from Thingiverse model. <a href="https://www.thingiverse.com/thing:2780267">https://www.thingiverse.com/thing:2780267</a></p><p>4x screws per leg need to secure to the lower tabletop.</p><p>Remixed the model above to be compatible with the Anycubic Vyper. I also added slopes to the inner column to close the gap to avoid overhangs. support is needed touching the build plate and I recommend having a raft for adhesion.</p><p>Leg extension measures at 152mm, sleeve is 29.5mm deep with 4.5mm wall. Lower corner bracket 38mm deep with 4x offset holes intended for M3 wood screws.</p><p>I printed with a 0.6mm nozzle at 35mm/s, 100% infill, brim of 30 lines and 15% triangular support touching build plate.</p><p>There’s just over an inch of space above the unit. I didn’t create enclosure feet for plex as I’m not sure if I will end up doing that.&nbsp;</p>