VzBot Ender 5

thingiverse

This is a remix of the original VzBot (CoreXY mod for Tronxy S5A) adapted for Ender 5 (Pro), https://grabcad.com/library/vzbot-1 Things I used: - 2x Rat Rig LDO-42STH47-2504AC, Wentai 42BYGHW811 or E3D High Torque NEMA17 steppers, - 1x [380mm 2020 extrusion or carbon fiber tube for X](https://s.click.aliexpress.com/e/_9vZEXS) - 1x [280mm MGN12 linear rails with MGN12H block for X (can also be MGN9H)](https://s.click.aliexpress.com/e/_9ifFgo) - 2x [300mm MGN12 linear rails with MGN12H block for Y](https://s.click.aliexpress.com/e/_9ifFgo) - 6x [5x30mm dowel](https://s.click.aliexpress.com/e/_AqSnBq) - 6x [Gates 2GT 6mm toothed idler](https://s.click.aliexpress.com/e/_9JWIn6) (12mm OD) - 2x [Gates 2GT 6mm idler](https://s.click.aliexpress.com/e/_9JWIn6) (12mm OD) - 8x 5x1mm spacers - ~5m [Gates 2GT 6mm belt](https://s.click.aliexpress.com/e/_9AYcve) - 20x M5x10 DIN912 for the mounts and brackets - 20x M5 spring nut - 2x M5x35 for the front idler down into the 4020 extrusion - 8x M3x10 DIN912 for the motors - Bolts and nut to attach the rails - Assorted nuts and bolts Do note that *2GT* and *GT2* are NOT the same tooth profile and it's not ideal to mix and match the two profiles. Most chinese 2GT stuff is actually mislabeled GT2. Everything prints without supports, for the X stops recommended 0.1mm layer height, the remaining parts are fine in 0.2mm. Print with at least 40% infill, 5 shells and 5 top/bottom layers.