Walimex videolight mount
prusaprinters
<h3>Introduction</h3> <p>The original mount on this Walimex videolight for scuba diving broke. It's also made from plastics and had threaded M3 holes for attachment. The threads wore out and the lamp was almost lost on a dive. :-(</p> <p>This replacement part uses M3 square nuts embedded into the part. Unless you break apart the whole thing it should be at least as stable as the original part, if not more.</p> <p>The original fixation screw on the side is kept and countered with an M5 nut on the inside.</p> <h3>Print instructions</h3><h3>Category: Sport & Outdoors Print Settings</h3> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.15 mm</p> <p><strong>Infill:</strong> 100 %</p> <p><strong>Notes:</strong></p> <p>Small support structures are required for the large flat feature. All holes etc. can be printed without as-is, i.e. use "Supports on build plate only" option and you should be fine.</p>
With this file you will be able to print Walimex videolight mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Walimex videolight mount.