Wall mount helmet for cosplay star wars etc.

thingiverse

Hi all. This is my go at a helmet wall mount. It was inspired by watching Ace Cosplay and their U shaped hook brackets. I couldn't find those, so I decided I would make something I could mount using 15mm copper pipe. There are different versions of the parts. A wall mount and a longer wall mount for heavier helmets. I made an adjustable and non adjustable helmet rest. I printed at .28 height but I think it made the threads tight (after I slimmed the threads already) It may be better at .2 height. The adjuster gives about 50mm extra height. The idea is so you can make the tube as high or low as you wish or as deep as you wish. I intend to epoxy the tube in the mounts and drill through the mount holes. You will need 50mm or 75mm countersunk screws to mount to the wall and the holes in the mount are 4mm. The adjuster is work in progress, as its copper tube tube I suppose you could just use the non adjusting topper and cut the pipe at the height you wish. (EDIT: ive adjusted the threads a little more and test printing now) Files are small enough to print on an ender 3 I just had my cr10s handy at the time Lastly the helmet rests, there are two design versions a standard flat one and a fillet version. Print whichever you wish. (EDIT: I have made an extra wall mount that allows the arm to be swung left or right for position or when not in use to prevent a hazard currently printing to test. This mount requires solder fittings to be glued, I recommend the fittings that don't have solder in the already. I may redesign the mount to take these too) See the fusion 360 images for reference. Thanks