Wall mount holder phone charging stand (6.35" and above screen)

thingiverse

I couldn't find a suitable 6.35" screen size phone wall mount for charging so I made one using Fusion 360 which I exported in .STL and then sliced using Cura settings for the stock Anet ET4 3D printer with "extra fast" settings at 0.3mm layer height and changed the temperature to 230 deg C for my PETG filament and 70 deg C for bed temp and infill settings to 100% since I want the maximum density to avoid weak points with the 0.3mm layer height. The print time was about 4 hours. You may want to tweak your slicer settings to better suit your printing quality but it will suffice. Note: I did not add holes in the design since It would hamper the print quality, and it would be better for my part to just drill the holes using a cordless drill or a Dremel or a drilling tool. It's easier and cleaner. If you don't want to use screws, I highly suggest use a 3M sticky double sided flexible adhesive as it adheres well to various surfaces even when the printed output is not that smooth.