Wall Mounted Baby Wipe Dispenser

prusaprinters

<p>Being a new dad (and a nerd), and needing a convenient way to access baby wipes I elected to design a wall mount so that I could grab them as needed off the wall. There is a plate in this model that is optional, I elected to include the plate with 5 springs (relatively stiff) which I glued in so that the plate would compress the pack of wipes as it emptied.</p> <p>In order to refill the holder, you depress the plate, and slide out the top piece, reverse that order of operations to reinsert.</p> <p>If you print it, I hope you like it!</p> <h3>Print instructions</h3><p>This print is fine to be printed in PLA/PETG/ABS, pretty much anything.</p> <p>I had good luck with PLA using 0.2 mm layers, and 20% fill. Seems reasonable durable.</p> <p>Other bits you will need include some method to mount this to a wall (will vary on your circumstances), springs (I don't have any exact recommendations as I just used some I had lying around), and some M3 hardware to hold it all together.</p>