Wall mounted circle flowerpot

thingiverse

Wall mounted circle flowerpot. For decoration. You will need some acrylic. Size: 180 mm diameter, 50mm height. You can hang it in the wall. It haves a hole for it. Or you can leave it at the ground. It will not fall. The transparent walls, can be made of acrylic or also can be printed. I added the 3D model. I Followed this steps for cutting the transparent acryclic circle, remember that you can also print it. 1. Superpose the printed circle in acrylic piece. Use a cutter to mark it. 2. Use a permanent marker. Follow the line marked with the cutter. The marker will slide over the mark. Making this way you will prevent to mark the printed pieze. 3. Use a dremel with the milling accesory. The circle will not be perfect, but don't worry, is a preform. 4. Use a belt sander to make the circle perfect. Work slow and try to insert the circular pieze on the flowerpot. 5. Cut the acrylic circle in a half. To achieve that, mark a center line whith permanent marker. Use the dremel with the cutting disc. Work slowly. 6. Use the belt sander to perfect the cutting. 7. Insert both semicircles inside the flowerpot. Glue the external ring with a few drops of cyanocrylate. 8. Insert little rocks, pebbles, and decorative plants to fill the gap of the flowerpot. 9 You can hang it in the wall or leave over the furniture. It will stand. Enjoy! This is my website development agency: [Diseño Web](https://iberotecno.com/).