Wall plate for 7inch LCD touch screen

prusaprinters

<h3>Required parts</h3><ul><li>4 screws for mounting (4mm diameter)</li><li>anchors adapted to your wall</li></ul><h3>Model</h3><p>The big part on the bottom hides the cables.</p><h3>Print instructions</h3><p>The plate is separated into two parts to fit the Mini+ plate. It can be printed using a large nozzle. I printed mine using a 0.8mm nozzle and the result looks great while keeping the print time manageable.</p><p>The spacers should maybe be printed more precisely. I used a 0.4mm nozzle for mine.</p><h3>Mounting</h3><p>I didn't think about it too much during the design phase. In retrospect, it's not <i>that</i> easy to mount but it's doable.</p><p>⚠️ There are two sizes of spacers:</p><ul><li>11mm spaces go against the wall;</li><li>10mm spacers go between the plate and the screen.</li></ul><p>Use 4mm diameter screws for mounting. You'll probably need to drill the existing holes on the screen PCB since they're too small.</p><ol><li>Drill your wall for your anchors</li><li>Mount the screen using the top part of the frame and two screws</li><li>Drill the cable hole</li><li>Pass your cables and plug them on the screen</li><li>Attach the bottom part</li></ol>