Wanhao D6 / Monoprice Ultimate - Bedplate Leveling Screw Stopper Clip

thingiverse

In my opinion, a must have accessory for the Wanhao Duplicator 6 / Monoprice Maker Ultimate. You can also cross out one variable as to what caused a botched print, or atleast it's easy to check if your leveling screw might have moved during a print... Spend less time bed leveling and adjusting your z-stop and more time printing successfully! This bed leveling screw stopper clip ensures your prints don't mess up because your bed plate leveling screws loosened and moved your bedplate upward resulting in your nozzle hitting the bedplate and filament, ruining what you were printing, and possibly loosening your nozzle and ruining your bedplate! ----- My bedplate leveling screw fell off as I was printing something... Making sure it won't fall off again, I designed this "bedplate leveling screw stopper clip" on Tinkercad, to stop the leveling screw from rotating when printing and possibly falling off and ruining your print as a consequence. -------------------------- Print 3 as there are 3 bedplate leveling screws. Best thing to do is level your bedplate first, then set the clips. How to Use: After you adjust your leveling screw, mount the clip by pressing the two ends together and pushing the clip straight through until it can't go any further, then release, to set the ends of the clip on the screw threads, then pivot the clip to the left towards the platform, touching it/bottoming out, to make sure the clip goes against the screw rotation and platform and doesn't move (as shown in one of the picture marked by the red arrows)--Caution: if you just push the clip straight through and set it without pivoting to the left, the screw will loosen slightly, pushing the clip until it touches the bedplate, resulting in raising the bedplate upward a little bit and possibly messing up whatever you were printing. Note: After setting the clip and locking it in place, check the leveling screws with your fingers to see if they rotate. They shouldn't rotate. ----- Edited 01Jul19 - I've updated the design to be as simple as possible. The previous shape of the tips were a weird shape and didn't print well enough for me, so I changed it. There's 2 files, Rev. 1 is the latest design although not heavily tested. The other file "just works." even though the tips are not pretty, but it requires a bit of post-processing.