Wanhao Mark 2 probe

thingiverse

This is for moving the stock probe on the i3 Plus Mark 2 printer to the front for use of a rear mounted cooling fan like the CiiiCooler. I know someone will ask, print it on the long flat side Firmware will have to be updated with my custom branch of a fork of ADVI3++: Mainboard: https://drive.google.com/open?id=1T19HTmWKvzRWZA8KxicIwsa2WjDQw3eq LCD: https://drive.google.com/open?id=1bSu_k9UbSu5Q7ZZ_kqCU3YgF4Vajv4aT Source: https://github.com/churd83/ADVi3pp-Marlin/tree/Mark2_Front-Probe When installing the Probe mount, slide it all the way to the right as far as it will go before tightening. If you do not slide it all the way to the right then it will not be in the right location for what the Firmware thinks it is and might cause you issues. You will have to set the z-offset manually by using gcode commands with a tethered computer. If you don't know how to do this, there are plenty of videos on youtube that explain it very well. Since this firmware is a Fork of the original source, I did not, will not, and have no idea how to, edit the touchscreen menus to make it easier for inductive sensors. The touchscreen options have Bltouch menus and I wouldn't suggest using them as they will not help you because obviously you aren't using a Bltouch. I have sent pull request to the original dev in hopes for future development for this printer. All other menu options and settings work as intended. If you want to use the stock location of the probe then use this Firmware for the Mainboard https://drive.google.com/open?id=1bG7zxwauCJsV18hA8incg7YkoyLyTHnN If for some reason anything doesn't work as it should, let me know what the issue is and i'll see if i can fix it If you would like to support the original developer of this firmware then go here: https://www.patreon.com/andrivet/posts