Wansview Webcam Mount Adapter

prusaprinters

<p>Adapter to mount Wansview 1080p webcam (<a href="https://www.amazon.com/gp/product/B088D3VXC6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1">https://www.amazon.com/gp/product/B088D3VXC6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1</a>) on articulating camera mount developed by Sneaks. Adapter modeled with female link and socket joint.</p><p>Other adapters I have seen required the hardware provided by the webcam to secure to a mount, but I mangled that screw pretty quickly because of how soft it was. Designed this mount to work without that screw.</p><p>Camera is secured with 8 inch zip ties (4.6 mm wide x 1.2 mm thick). Anything smaller than that should also work assuming zip tie is long enough.</p><p>&nbsp;</p><p>Update 3/2/21:</p><p>Thinner version of female link mount added. Achieves same function with less plastic and allows for neater print.</p><h3>Print instructions</h3><p>wansview-thin-mount-female-link print with webcam side face down, no supports needed.</p><p>[outdated] wansview-mount-female-link printed with webcam side face down and "Support on build plate only" enabled (PrusaSlicer). There is probably a better way to do it to get a nicer finish on webcam face of this piece, but this worked well enough for me.</p><p>wansview-mount-socket-joint printed with webcam side face up. I had this piece break free mid print once, so I use a 3mm brim to increase bed adhesion. Might not be necessary for others.</p>