Water Bottle Dispenser Rack

prusaprinters

<p>UPDATE 2021.10.01 - Per request, I've added a brace to space the halves out to accommodate 26cm-tall Club Mate bottles.</p><p>&nbsp;</p><p>Heavily customized the parametric can dispenser (https://www.thingiverse.com/thing:2819151) to use with water bottles. I used the SCAD script to create the basis with the correct dimensions. I made a hex cutout pattern for airflow in the refrigerator, omitted the top and bottom braces, and I added some much stronger insertable braces instead.</p><p>The rack itself prints in 4 separate pieces that each fit on my Prusa Mini's 7in print bed.</p><p>This rack holds 9 standard 500mL water bottles.</p><p>Assembled dimensions are:<br>Width: 21.6cm (~8.5in)<br>Height: 17cm (~6.5in)<br>Depth: 31.75cm (~12.5in)</p><p>&nbsp;</p><p>&nbsp;</p><h3>Print Settings</h3><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>No</p><p><strong>Resolution: </strong>400</p><p><strong>Infill: </strong>15</p><p><strong>Filament: </strong>PLA<br>&nbsp;</p><p><strong>Notes:&nbsp;</strong></p><p>Print each of the four components, plus four of the braces. You will need two-part epoxy or a lot of superglue to assemble the pieces.</p><p>This takes a long time to print and uses almost a full kg roll of filament. I advise you to use a 0.8mm nozzle and print at 0.4mm layer height to save a lot of time.</p>