Water tank lid for Krups Nespresso Vertuo

prusaprinters

<p>The water tank lid for our Nespresso Vertuo coffee maker got lost while moving house, so this was the perfect excuse to take a break from moving furniture around.&nbsp;</p><p>I modelled a new lid in Fusion 360 and printed this on my Ender 3v2.&nbsp;</p><p>I used the following settings, which I suspect were default slicer settings for standard quality:</p><ul><li>0.2 layer height&nbsp;</li><li>20% infill</li><li>2 walls</li><li>4 top and bottom layers (probably excessive)</li></ul><p>I printed this is standard black PLA and it fits our tank perfectly.&nbsp;</p><p>Seems like an obvious thing to say, but make sure to print it upside down to remove any need for supports and maximise bed adhesion.</p><p>The lid measures:</p><ul><li>15.2mm high</li><li>88.2mm largest diameter</li><li>81.95mm outside diameter of the bit that fits inside the tank</li></ul>