Waterproof Raspberry Pi 2B + Raspberry Pi Noir camera v2 Case

thingiverse

This is a Waterproof Raspberry Pi 2B + Raspberry Pi Noir camera v2 Case designed for Dr. Scott Eckert in the biology department of Principia College during the 3D printing Lab class directed by Dr. Marie Farson. The purpose of this Waterproof case is to take pictures of Rattle Snakes allocated on campus for research purposes. This case has a waterproof entrance for cables, specifically for an external battery so the Raspberry Pi 2B and camera can be powered. The idea is to upload software to the Raspberry Pi that will take a picture every 5-10 minutes and capture the behaviors inside the Rattle Snake's dens providing data for Dr. Eckert's research. This product was designed in FreeCAD, and there are two components: The box and the lid. Both have independent STL, FreeCAD and GCODE files that are provided below. This Waterproof Raspberry Pi 2B + Raspberry Pi Noir camera v2 Case has a Commons - Attribution - Share Alike LICENSE. The slicing parameters used in the Ultimaker-Cura software were: COSTS: -Raspberry Pi 2B: $45.00 -Raspberry Pi Noir Camera v2:$30.00 -Print Filament Box: 34.5 meters: $15/335mts * 34.5mts = $1.54 -Print Filament Lid: 14.7 meters: $15/335mts * 14.7 mts = $0.65 -M2 screws x 8 = $0.10 * 8 = $0.80 -M2 Bolts x 8 = $0.12 * 8 = $0.96 -Waterproof Cable Gland = $1.42 TOTAL COST: $80.37 USD FOR BOX PRINT Layer Height: 0.3mm| Infill: 10%| Orientation: Horizontal| Travel speed: 120mm/s| Extrusion speed: 48mm/s| Print temp: 220 Celcius| Skirt/Brim/Raft: Brim 8mm| Number of shells: 16| Fan speed: 100%| FOR LID PRINT Layer Height: 0.3mm| Infill: 20%| Orientation: Horizontal| Travel speed: 120mm/s| Extrusion speed: 48mm/s| Print temp: 210 Celcius| Skirt/Brim/Raft: Brim 6mm| Number of shells: 16| Fan speed: 60%|