We Are 3D - Building Blocks

thingiverse

These Lego-style building blocks were designed for the second print tutorial of the Quick Start guide for the We Are 3D MagiCube printer. Both a 2x2 and a 2x4 block are included, each with 4 different wall thicknesses (1.1mm to 1.4mm). Print Settings Printer: MagiCube Rafts: Doesn't Matter Supports: No Resolution: 0.2mm or 0.3mm Infill: 40% Notes: Depending on your first layer height, and the filament that you use, a different wall thickness may be required to get the blocks to connect together. Start with the 1.2mm wall thickness, and see if they connect. If they're too loose, move up to 1.3 or 1.4. If they won't connect together, try the 1.1mm wall thickness. You will probably want the blocks to be a bit tight to start, and they will loosen up after a few times being connected and taken apart. You can also experiment with a raft to see if that changes the thickness of the first layer. No support is needed, as the bridges inside the blocks are very small, and any sag won't affect the functionality.