Wet wipe box

prusaprinters

<p>My wife wanted a pretty box for the wet wipes, so I made a box to keep them in with some added features.&nbsp;</p><p>The complete assembled box is about 240 grams, and this is enough to weigh it down, which help to pull the wipes onehanded, even if the pack is near empty. The inner lid can also be pushed down to compress the pack, which helps to keep the wipes moist for longer. I don't see the point of adding a cap for the same purpose, in our household with children we go through the packs quicker than the time it takes to dry them out.</p><p>This is a four part print - An inner box, an inner lid, an outer shell and a outer base. The inner box should be glued to the outer base. The reason to split these two is to be able to save some plastic for the outer shell, i.e. to enable the use of a basic/cheap color for the inner box which is hidden.</p><p>A tip is to print the inner lid part with a more interesting bottom infill pattern, such as hilbert curve or archimedian chords.</p><p>The wet wipe pack/bundle this is designed for is Pampers 80 per/pack, which roughly measures L182, W82, H54mm. If your wipe pack are larger, a tip is to scaled up the parts by a bit in the slicer, just have the orientation and direction on the bed in mind to scale on the same axis for all parts.</p><p>Optimized for 0,45mm extrusion width.</p>