Wind Spinner Spiral Helix Thingy

thingiverse

Don't stare at it for too long or you will lose your mind. Printed in ABS with a 0.6mm nozzle and 0.3 layer height at 150mm/s. Takes about 2.5 hours to print. This is not a spiral vase mode model, just very thin walls. Has a little hole on the top of the column where you can screw in some sort of anchor for the string or mount or bearing. I used a 1" drywall screw. IMORTANT: Use a raft to increase bed adhesion. I also used enforced supports for the first 30 layers to increase stability. Other than in that lowest area, supports are not required (see pics).