windscreen wipers for glasses

thingiverse

These are the files for a set of wipers for some glasses that i deigned for a school project. Please feel free to modify them and improve on them as you find necessary. There may be duplicate files so only print what you think is required. To make them you will need some electrical tape (for the wipers) two small motors (like the ones you get in children's electronics sets) and a switch (you will probably need to modify the STL files to fit your switch). you will also need to drill two extra holes in the large pieces to get the wires in if you can not get them all through the two existing holes (i couldn't). i made the battery pack out of two AAA battery is stuck together with tape and taped wire on the terminals. Thanks for looking at my thing. AssistiveTech ps do not use the piece with the attacher built in if your printer is not very good with supports or you are using a dissolvable support material (i would just get the attacher and glue it to the other side part. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Infill: high Notes: only use supports for the piece with rods on.