Wio Link Case
thingiverse
Wio Link + Battery Compartment Materials Needed: 4pcs M3 screws with nut Optional: Double sided tape to hold the battery v.1.1 The cover has .5mm spacing on all sides from the base. The Wio Boards was not gonna fit, you need to cut or file on some edges inside the case to fit the wio board. You will need 4 M3 screws to mount the board at the cover (facing down). This is a work in progress version, i did not recommend printing it. v.1.2 The .5mm spacing was removed to make the cover fit on the base. Made some adjustment inside the case so the Wio board should fit without post printing adjustments. Vent holes was replaced by open hardware logo. Minor improvements in USB, Grove Connector holes Adjust battery wire way Print Settings Printer: Wanhao Duplicator i3 Rafts: No Supports: No
With this file you will be able to print Wio Link Case with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Wio Link Case.