Wiper Motor Sex Machine

thingiverse

You need to print: 2x Rod Connector 1x Suction Cup Holder optional: 1x Handle I used a 1/4in 3ft screw that I cut to size and 2 security nuts in the connectors, as well as 2 normal nuts outside of the connectors to make a secure connection. I also used 4 10mm bearings in the rod connectors (2 each) and a 5mm screw that connects to the motor and to the drawer slide. I also used an old broomstick stick that I had laying around (21mm diameter). I used a PWM controller that I had lying around, like this one: https://www.aliexpress.com/item/1005002363477239.html?spm=a2g0o.productlist.main.25.4d3563f8FhKVKn&algo_pvid=a06b17d8-205b-4f05-8da8-c55a1188724e&algo_exp_id=a06b17d8-205b-4f05-8da8-c55a1188724e-12&pdp_npi=3%40dis%21USD%2112.85%2110.79%21%21%21%21%21%4021224cdb16822113275014079d070a%2112000020323162898%21sea%21MX%212241846715&curPageLogUid=hppfsY0xGeWr Unfortunately I cant find the one I used specifically, but I also don't recommend it because mine gets hot and smells burned after a minute. Get something better. Settings: Suction Cup: ironing on infill 35% zigzag support: 3% density touching buildplate Rod Holder: print this part solid. no support. Handle: 3-5% support density support everywhere The Wiper Motor I also had lying around, and I used 4 3in angle irons to fix it to a wood board. As far as I can tell the motor is plenty powerful, but also gets really hot after a while.