Wire Rack Shelving Filament Hanger

thingiverse

I created a filament hanger that fits within the gaps in wire rack shelving. I set mine up on a the shelf above my printers. It is not perfect by any means but it is functional. **Printer:** Ender 3 v2 **Slicer:** PrusaSlicer **Layer Height:** 0.2mm **Infill:** 75% rectilinear **Supports:** None **Rafts:** None **Setup:** Print all parts with preferred settings or the settings I used. Attach both parts with either a small nut and bolt or a screw. I used a self tapping screw and threaded it by hand. No cracking or issues with the threaded screw. This gave me a firm hold between the parts. **Variables:** My shelving unit has 27mm between each wire so I created the clip/hanger portion to be 26mm wide. Yours may be different so be sure to measure. The inner diameter of the cylinders will fit 1" PVC. I personally used a 1" dowel so it wouldn't bend with the weight of filaments. I am using this on a 36" wide shelving unit with 6 spools on the bar, no issues so far. **EXAMPLE STL IS NOT FOR PRINTING - IT IS ONLY TO SHOW HOW IT WILL LOOK**