Wolf Head (Cub Totem Grand Howl)

thingiverse

I wanted to make a Totem Wolf head for my son's Cub weekly meeting Grand Howl Ceremony. I sliced moutoun's Wolf head into three pieces to reduce the amount of Supports required and so I could print it bigger than my Ender 3 would allow. There are locating pins in each model sections. The bottom has a threaded hole (from Halley's thingi) to fit onto a broomstick. There is also a hollow inside the model, where I inserted a note and 3d printed coin, before gluing the model together. <blockquote><b>Update June 15, 2019:</b> I forgot that I used a different Pin model for the four pins. I used the <i>Pin 10x20 v1.stl</i> file, which will be stronger. You will need to print four of them. The are printed horizontally, split in half (instead of upright), with a hinge to make the pin. I didn't bother glueing the pins before inserting them into the model. You can still use the <i>Grand_Howl_Too_Pins.stl</i> if you want too. </blockquote> I am including a base that I originally used when painting the Wolf Head. It can also be used as a display stand. Probably not of use to anyone, but I also made a tripod mount for the Wolf Head. I found that it was much easier to paint the model when I could lock it into any position on the tripod, opposed to the flat base. This <i>Broom Thread Release Plate.stl</i> fits a <b>Manfrotto RC386</b> Quick Release Head. If you like this thing, please post a make. <b>Update June 19, 2019:</b> I remixed a [Keychain version of the wolf](https://www.thingiverse.com/thing:3702344), which prints in one piece.[https://www.thingiverse.com/thing:3702344](https://www.thingiverse.com/thing:3702344)