Worm-Gear Reducer
thingiverse
Presented worm gear reducer with module 1.5 and 60x10 (6:1) teeth on driven gear and minimalistic frame that hold all details together. Also included motor adapter that I used to connect motor to worm part. All details connected using M4 bolts and nuts. Instructions Print "M1,5 - Worm 20x28 mm - With Hole.STL" as worm with high quality (I printed 0.1 mm per layer) and "Worm Gear - M1.5 with 60 teeth x 20mm with M2 10 teeth gear (Flat Spokes).STL" or "Worm Gear - M1.5 with 60 teeth x 20mm with M2 10 teeth gear (Round Spokes).STL" as driven gear (I printed in standard quality 0.2 mm per layer). Case consists from two details: "Case (Left Side).STL" and "Case (Right Side).STL" and fit just fine motor with outer diameter of 28 mm that I have. Optionally you can also print and use motor connector that I used. It consists from two parts "Motor Gear Connector (Sliced) - 2.STL" connected with M3x16 bolts with M4 nut inside. Assemble all details together using M4 bolts and nuts. Have fun!
With this file you will be able to print Worm-Gear Reducer with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Worm-Gear Reducer.