X-shot Turbo Advance N-Strike Stock mount attachment V1.1

thingiverse

N-Strike stock mounting point for the Turbo Advance. It will allow you to mount most nerf n-strike stocks to it, although admittedly I only tested it with the demolisher stock. V1.1 Update 30th July - Edited the file to be a bit chunkier, as well as more aesthetically pleasing, in my opinion anyway. - Included the old v1.0 STL and STEP files in a zip file, just in case you want those. STEP file is provided if you wish to remix it for better aesthetics or whatever you like. Please do post your makes, I'd like to see what you do with them. Things needed: 6x 10mm Nerf Shell Screws. Best place to find them easily would be Foamblast, here https://foamblastshop.com/product/nerf-compatible-shell-screws/ 2mm drill bit, and some kind of drill too, I suppose. Screwdriver for screws A tasty beverage. 1. Print the part using the recommended print settings below. 2. Fit the part to the back of your blaster and hold it securely, pushing it towards the front of the blaster, as to get the closest fit. I use clear sellotape or packing tape to keep it in place while I do the next part. 3. Use the 2mm drill bit to drill into the provided screw holes, and into the shell. Be careful not to drill too deeply or you may potentially damage the internals of your TA. 4. Screw the shell screws into the holes, being VERY careful not to over-tighten them. If you hear a cracking noise, you've tightened them too much. The heads of the screws will sit slightly proud with the surface of the mount (means they will stick out). Just screw them until the part is snugly secure, and it should count fine.