X Slide T Belt Adjuster
thingiverse
The Hesine 505B Printer comes with a belt holder for the "X" Slide carriage, Adjustment of the T belt was almost impossible. The 3 STL's presented here will enable the belt to be fine adjusted for best performance. The Belt plate is tapped for 2-56 screws after printing. Notes for Tapping in PLA; only hand tap never use a drill, it will overheat the plastic. The adjusters are secured to the belt plate with 4 (2-56 X 3/8") socket head cap screws. The adjustment screw is a 2-56 X 1/2" socket head cap screw. the Belt plate is secured to the Metal extruder carrier with 2 M3 x .5 x 8 socket head cap screws. I have uploaded the 10mm PMA Conduit clamp and cover as requested. The PMA clamp utilizes 2-56 x 1/2" screws for the top cover and 4 m4 x 8mm to attach to the linear bearing blocks
With this file you will be able to print X Slide T Belt Adjuster with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on X Slide T Belt Adjuster.