X-UAV Talon MPX Plug Holder

thingiverse

Introduction -------------- This is a very simple plate designed to hold an MPX connector in place on the X-UAV Talon (preferrably with wing extensions, but should work without them as well). These are for the RIGHT side of the Talon, simply print them mirrored for the left side. To install, simply cut a recess the size of the plate into the wings/extensions and glue them in with the connector already installed. If you're using wing extensions (like me), install the connector in the plate, guide the wires through the wing and only then glue it in place. If you have any questions feel free to ask! :) Version History ----------------- * V1 (15.1.2018) > Initial release Suggestions -------------- * Use an additional wing locking mechanism! (I'll upload one at a later date) * Glue in the MPX connectors (after soldering of course) with CA glue first * While drying, use clear tape (see picture 1) to hold the plug in place * I used UHU POR to glue the holder into the wing