XBOX Elite Series 2 Controller - Holding Hand

thingiverse

XBOX Elite Series 2 Controller Holding Hand =========================================== Holding Hand ------------ - Material: PETG, PLA, ... - Supports: Yes (touching buildplate only) - Infill: 15% - At least 3 walls/tops/bottoms recommended Mounting Bracket ---------------- - Material: PETG, PLA, ... - Supports: No - Infill: 34% - At least 4 walls/tops/bottoms recommended Other stuff required -------------------- - 1x M6 flat-head screw, 50-80mm long - 1x M6 nut - 2x appropriate flat-head screws to mount the holding hand to wall or whatever. - 1x 15mm round, 4mm thick neodymium magnet to hold down the docking station on the hand. Ideally, use one with a hole and screw it down or use one without hole and some glue. Pay attention to the **magnet polarity** in both cases, since the docking station has also magnets inside to hold down the controller. - 1x Right-angle USB-C to USB-A cable. Straight cables probably won't fit. Final tip --------- The hand has perforated breakouts on top and bottom sides. Use some pliers for breakout if you want to lead the USB cable through the hand or hide it inside the wall. **Have fun! :)**