Xtool D1 over shield air assist

cults3d

An air assist for the Xtool D1 laser engraver that routes the air around the stock laser shield, so you do not have to cut or drill anything. It is installed by removing the shield, putting the nozzle in place, then re-installing the shield. The nozzle fits snugly around the 16mm Xtool D1 lens and the air flow keeps the lens clear of debris. It does not impede focus function and requires no special tools (other than the tools included with the laser) to install. The optional (but recommended) tube guide will need 1 M3x30mm screw (exactly 5 mm longer than the stock screw) The exterior design is squared off to allow easy printing on an FDM printer and all angles are 45 degrees or less so no supports are needed. I was able to print without supports on an Ender 3, but if you need supports then absolutely make sure they are not generating inside the duct. The barb is sized for silicone tubing with a 1/4 inch ID. The tubing also fits on an inexpensive air pump without the need for adapters. Both items can be found on amazon: Tubing: https://amzn.to/3qiNFdp Pump: https://amzn.to/3wjSnv6 Note: This item was designed on the 10 Watt version. If you have the 5 or 20 Watt versions and need some adjustments to make it fit, let me know and we can work it out.