XXL Wild bird feeder

thingiverse

Wild bird feeder with 100mm diameter Plexiglas tube. There are several options when assembling. As can be seen in the photo (with roof V3), all parts are required, If you print the roof V1, you have to screw it directly to the Plexiglas tube (height is then variable). With V3, this is screwed onto the boy, followed by the adapter with the plexiglass tube. The roof V3 takes a long time to print and with support material around 350g filament, hence the much lighter V1 as an option. Both roofs require around 330mm of printing space. The body and all other parts can also be printed on a e.g. Ender 3 print. The following things are required: 100mm Plexiglas tube (>200mm length) 3x M5 melt-in threads for the Boddy and the handle adapter 8x M4 melt-in thread for V3 and adapter (4ea each) Stainless steel screws and washers All parts (except for the seals) are printed in PETG, the seals in TPU. In my opinion, the only way for water to get in is between the adapter and the roof V3, so I put some Vasiline there during the assembly, braver ones can also use silicone. The feeding column is mounted on a 25mm handle with a handle adapter adapter, for this purpose a screw is screwed from the body into the adapter, this is then secured from the outside with 2 screws after being attached to the handle.