Yaw VR Footrest Adapter

thingiverse

This is a modular footrest adapter to quickly swap out the original footrest. The parts have a .25mm gap to allow for easy sliding. If this gap is too much it can be shimmed with some blue painters tape. I found with the screw tightened down that movement was minimal though. The screw should be sized at 95% in X and Y but leave Z at 100% or the thread pitch will be off. The base can be attached to the bottom using M4 pan head bolts. The plate attaches to the original footrest using M4 oval head screws. You should be able to find the M4 screws at a hardware store. I designed the plate to attach to plywood using 3/4" screws with an integrated washer. I had some around but they should also be available at a hardware store.