Z Height Adjuster - For Rock Solid X Axis Prusa Mount
thingiverse
A clamp on Z Height adjuster for use with my Rock Solid mounts. You need: 2x M3x25 Bolts 2x M3 nuts 2x M3 washers 1x small coil spring (nominal 3mm ID) Notch in the dial so you can quickly see if Z height has shifted, or calculate no. of turns. With M3 bolts 1 turn is 0.5mm which is convenient. Instructions This one is 0.3mm layer height, 20% infill, no supports. Ream out the top of the knob with a 5.5mm drill bit for the first 1/2 to 2/3rds. This will make sure that your cap head M3 bolt push fits solidly in. If yours is a little loose (or if you drilled too much) a drop of superglue will be adequate.
With this file you will be able to print Z Height Adjuster - For Rock Solid X Axis Prusa Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Z Height Adjuster - For Rock Solid X Axis Prusa Mount.