Z-Motor holder with precision Z-Axis calibration for Velleman K8200 / 3Drag

thingiverse

The motor mount plate has been modified with an Extended Z endstop microswitch mounting plate, ensuring the motor holder remains unchanged from its original configuration. A brand-new Z endstop screw block was designed from scratch, influenced by mr_cg's concept. This new design is shorter and positions the screw farther away from the Z gantry, making regulation more manageable. To assemble this setup, you'll need to gather several components: * Four M3x12mm screws and four M3 washers (locking type) for mounting the motor * Four M3x20mm screws, four M3 nuts, and four M3 washers to assemble the motor plate and holder * Two M3x25mm screws, six M3 nuts, and four M3 washers to secure the microswitch to the plate When installing the Z endstop screw block, you can reuse the original screw, washers, and nut. **Print Settings** **Printer:** Velleman K8200 **Rafting:** Yes **Supports:** No **Resolution:** 0.3mm **Infill:** 50% **Notes:** Printed in PLA. The holes on the plate have been drilled out to simplify screw insertion.