Zerotech DOBBY prop connector

prusaprinters

<p>This is the prop connector that is sometimes breaking. I have designed it for better printing and more durability, so the thing has not the original measurements.</p> <p>After printing you must drill ALL 3 holes with 1,5mm and then the outer ones with 2mm.<br/> It is a little bit tricky because you must drill straight and not to slow(2mm holes).<br/> But the connector works nice :-)</p> <p>Use threadlocker medium for the screws, so you dont need to full tighten the screws and you can adjust the tightness !</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>RepRap</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Prusa I3</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p> <p>0,2mm</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>100</p></div></p> <p><strong>Notes:</strong></p> <p>Printed with PLA, 0,4mm nozzle, 40mm/sec, heated bed and fan on full speed(255).</p> <h3> Post-Printing</h3> <p>After printing you must drill ALL 3 holes with 1,5mm and then the outer ones with 2mm.<br/> It is a little bit tricky because you must drill straight and not to slow(2mm holes).<br/> But the connector works nice :-)</p> <p>Use threadlocker medium for the screws, so you dont need to full tighten the screws and you can adjust the tightness !</p> </p></p></p> Category: R/C Vehicles