Zerotech DOBBY prop connector

thingiverse

This is the prop connector that is sometimes breaking. I have designed it for better printing and more durability, so the thing has not the original measurements. After printing you must drill ALL 3 holes with 1,5mm and then the outer ones with 2mm. It is a little bit tricky because you must drill straight and not to slow(2mm holes). But the connector works nice :-) Use threadlocker medium for the screws, so you dont need to full tighten the screws and you can adjust the tightness ! Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: No Supports: No Resolution: 0,2mm Infill: 100 Notes: Printed with PLA, 0,4mm nozzle, 40mm/sec, heated bed and fan on full speed(255). Post-Printing After printing you must drill ALL 3 holes with 1,5mm and then the outer ones with 2mm. It is a little bit tricky because you must drill straight and not to slow(2mm holes). But the connector works nice :-) Use threadlocker medium for the screws, so you dont need to full tighten the screws and you can adjust the tightness !