Zipper Pull using 18 AWG wire
thingiverse
### Summary Replacement zipper pull, requires vitamins: * 18 AWG galvanized wire * 6mm M2 machine screw + nut ### Notes This pull replaces one from a relatively small zipper that is really tough to pull and needs to be very strong. To make your own you'll have to feed a short length of 18AWG wire through the zipper and then bend it with fine pliers until you get the shape right so that it will seat in the wire channel of the pull. When it's close sandwich the two sides together and tighten, it should come together nicely. The channel is 1.5mm in diameter, in order to fit 18AWG wire, which is ~1mm diameter with room for not perfectly straight wire. So far the wire hasn't budged. https://a360.co/2SbE74T
With this file you will be able to print Zipper Pull using 18 AWG wire with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Zipper Pull using 18 AWG wire.