Zotac RTX 2070 Super Mini 1x/2x 120mm Fan Adapter

thingiverse

Fan duct for using one or two 120mm fans on the Zotac RTX 2070 Super Mini. Might also work on other Cards with the same cooler (90mm fan holes with an 9.8mm wall between them). Vastly lowered the noise level and eliminated my thermal throttling as well (throttled at 88°C before, now stays at 85°C with higher core clock). Left and right is the same as duo, just split up so it can be printed on a smaller bed. The clips are designed to have a built in support. You might need to cut these away after printing, but in my first test they worked fine without cleanup. Just unscrew the original fans (you might also need to unscrew the original cover to unplug them), screw the new fans on the printed shroud and clip it into the original shroud. Depending on your new fans you might need an adapter if you want to use the graphic cards fan control. I plugged them into my mainboard so I can controll them via the software Argus Monitor (no lower PWM limit instead of the 33% of the graphic cards fan control). Fusion360 files provided if one wants to remix for other fans or other cards. I didn't test the mono version, but since the duo works the mono should work, too. Feedback is appreciated!