anet a8 psu fan 3d models

... is too short, so I designed an extended version to compensate. ...My plate for the sensor is 5mm thick, which adds 5mm to the "neck" of this shroud. Print Settings: Printer: Anet A8 Rafts: Not necessary Supports: No Resolution: 0.2 mm Infill: 20%

The Dual Extruder for Anet A8: A Game-Changing Upgrade Compared to the existing Dual X carriage, this innovative system is more straightforward and delivers superior results. ... Watch a demonstration of its capabilities here:...

A bracket stronger and a little longer than the original, to hold my chinese BLTouch clone on my A8 printer.

The A8 logo is designed to be stuck on, and version 2 features a different font that prints more easily.

Print Settings Printer: Anet A8 Rafts: No Supports: Yes Resolution: .2 Infill: 50% Notes: I used supports for the base Post-Printing Assembly The mating areas on the guide's bottom piece and the base will need to be cleaned up a little before...

This is a remake, of Anet A8 Electronics Case by FqFKrazz. Originally, I was struggling to find a case that would fit my printer bed so I decided to take this one and cut it into three pieces in order to make it fit perfectly. To add functionality, I...

A new, simplified thumbwheel has been designed specifically for the Anet A3 printer, featuring a larger size and improved usability.

The top mount for my Anet now sits much more securely in place on that particular side.

Remix X-axis from https://www.thingiverse.com/thing:2115095 by The_Random_Engineer Filament guide from https://www.thingiverse.com/thing:1859405 by STIG_ Filament Sensor https://www.thingiverse.com/thing:2443425 by Leo_N I changed the original Anet...

Human: Remix X-axis from https://www.thingiverse.com/thing:2115095 by The_Random_Engineer Filament guide from https://www.thingiverse.com/thing:1859405 by STIG_ Filament Sensor https://www.thingiverse.com/thing:2443425 by Leo_N I swapped out the...

Network cable cover A8 provides reliable protection for cables and wires, safeguarding them from damage and wear caused by daily usage and environmental factors.

Remix of my Anet A3 fan case upgrade now features two vents measuring 50mm apart for improved airflow.\nIf you appreciate this innovative design, consider showing your support with a cup of coffee, available via the link in my profile.

Mount the simple ATX PSU securely to a stable base. Make sure it's firmly seated on the mounting clips. ...Verify that all screws are tightened evenly and snugly into place.

This remix offers an improved version of the Anet A3 LCD buttons, replacing the traditional glue-on setup with a convenient push-in-place design.

To secure my Anet firmly in place. ... Crafted specifically for authentic M3 screws, used for the belt tensioner, and robust 4.5 x 20mm Spax screws.

RESTRURCTURATION OF THE ORIGINAL ANET A 8, CONSIST IN REMOVE TE PLASTIC FRAME TO A RIGID ALUMINIUN PROFILE 45 X 45.

This is a customized extruder lightbar designed specifically for the Anet A3, with potential compatibility for other Prusa I3 replicas. ... We reengineered this design using Rhino 5 software.

RESTRURCTURATION OF THE ORIGINAL ANET A 8, CONSIST IN REMOVE TE PLASTIC FRAME TO A RIGID ALUMINIUN PROFILE 45 X 45.

I plugged my Anet A3 hotbed and it worked great, but then I made a mistake that left it looking like the one in this photo.

Follow these steps to ensure your filament feeds smoothly and avoids getting jammed: place the filament onto the top of the print bed, making sure it fits snugly in its designated slot within the A8-frame assembly.

Hi, it's my new tray to the corner of printer Tatara A8.Update: v2 - smaller walls for save some material and little bit smaller size.

The adapter is designed to hold a PSU with a rectangular hole pattern that measures 50x150 mm and M4 screws on one side, while the other side has mounting holes for the original Anet M3x18 screws and nuts. ...It worked out of the box without any issues.

... at http://www.thingiverse.com/thing:1752018. **Print Settings** * Printer: Alunar Prusa i3 (A8) * Rafts: No * Supports: No * Resolution: Cura 2.1 Default - Low Quality * Infill: 10% * Notes: Print at 205 C to reduce stringing in the holes.

ANET A8 Extruder Fan Duct

An innovative solution for the Anet A3 3D printer - a versatile chameleon face plate designed specifically to conceal unsightly openings caused by the LCD screen and control buttons, elevating the aesthetic appeal of this device.

I was experiencing issues with the Y-axis on my Anet, as the belt had become slightly loose in the unattached section. ...To resolve this problem, I designed a solution that has successfully tightened the belt.

I've created my own level rings for the Anet A3. I just wanted some that would make leveling easier. ...Simply press down on the nut and screw it from below.

I recreated this from Snoekieboe's original concept, and I really liked his idea after building an external screen enclosure to fill the gap on my Anet board. ...I simply reworded it myself.

I designed a custom spool holder for my Anet A3 3D printer. I wanted to create a low-profile spool holder that would improve the overall appearance of my machine. ...To achieve this, I created a simple and functional design.

... holder designed based on Thingiverse's reference model 2729772, tailored to accommodate PH1 and PH2 screwdrivers seamlessly. ...The design was adapted to perfectly fit the original Anet keyboard key, ensuring a secure and convenient storage solution.