ctc 3dprinter

For additional information, visit: http://www.thingiverse.com/thing:449877 and http://www.thingiverse.com/thing:307832 Print Settings: Printer: CTC Rafts: No Supports: No Resolution: 0.2 layer height, 5 top/bottom surfaces and 3 perimeters Infill:...

Design Version: V_5.1 (Final) Print Version: V_2.2 Print Settings Printer: CTC (mk8) Rafts: Doesn't Matter Supports: No Resolution: High, 0.3 mm layer height MAX Infill: From 25% Notes: Recommended print settings: - Speed while extruding: 40 mm/min...

I wanted a bigger build volume for my CTC Replicator, and I decided to get the Replicator 2 build plate from Makerbot. I chose this option because I've had great experiences with how level and uniform their build surface is. Plus, I print directly...

Print Settings Printer: CTC Dual (Sailfish x.7) Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 10% Hex Notes: Print time is 5-6 hours at 60 mm/s. I recommend printing in ABS and sealing it with acetone to make cleaning a breeze. My initial PLA...

Here's a detailed look at the print settings: Printer Settings: * Printer model: ctc rep dual sailfish * No rafts required Supports are not necessary for this design, but feel free to include them if you prefer. Resolution: A precise 0.25 is ideal...

and Dec., and if you're interested, check out my RA Motor Cover on Thingiverse: http://www.thingiverse.com/thing:1955927 Print Settings: Printer: ctc rep dual sailfished Rafts: No Supports: No Resolution: 0.25 Infill: 0.25 Notes: This slips over the...

ALSO I have finally got rid of the warping on my CTC machine - I tried all temps and glass plates e.t.c. and then I just covered the sides and front with see-through cling wrap to stop the draft and I have had no probs with warping - in fact, my only...

Print Settings Printer: ctc rep dual sailfish Resolution: 0.25 Infill: 0.25 Post-Printing Deconstructions Remove the motor unit from the tripod. Remove the 2 small screws that hold the RJ11/RJ12 connector board from the metal bracket. Slide the...

Print Settings: Printer: CTC Resolution: .2mm Infill: 20% Notes: I've included two versions - standard dovetail and one with fillets. Just choose what you like. A matched stand is also available. Printable without raft &...

Printing tips: - Use CTC Bizer (a reliable clone of Makerbot) for optimal results. - Choose Hatchbox PLA black for its durability and vibrant color. - Set your hotend temperature to 200c and build plate to 60c. - Opt for a 25% infill setting for a...

Dimensions are: 50mm in height 100mm in diameter Designed to fit a bottle top with a 30mm diameter Print Settings Printer: CTC Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: Sliced using Cura 2.4, 0.2mm layer height, 0.4mm infill...

... with a layer height of 0.2 mm and experienced issues. Printer Settings: Printer: CTC 3D Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 10% Notes: Most parts were printed without supports, except for the legs, which require well-placed support.

Quick and Dirty Fix for 10x20 Chain Connector Extruder CTC Prusa DIY Motor Mount The part that connects the screw is not attached to the rest of the original. This becomes apparent in the .stl viewer or slicer, but I only noticed it after it broke...

Hey Everyone, I needed an urgent solution for my CTC printer's lighting, so I found a great deal on cheap LED strips from a Chinese supplier - 3€ for 5 meters, with each meter containing 300 LEDs! I quickly created a custom holder around these...

For further assistance or detailed questions on creating a successful dual extrusion setup similar to mine using a CTC Dual printer model with the STI logo accessory printed in two different colors at a 0.1-0.2mm high precision setting without...

Print Settings: Printer: CTC dual Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: Pendant=50% Oval loop=100% I used PLA for this project, but I'd love to see the design in other interesting materials and colors. Supports are only...

Printer: ctc 3d Rafts: Don't bother with rafts Supports: Include them Resolution: Use a minimum of 0.2 Infill: Set at 10 Notes: You can print this using either ABS or PLA material. ...First, print the top base on its own and then assemble it with the...

Print Settings Printer: CTC Prusa i3 Pro B Rafts: No Supports: Yes Infill: 20% Notes: I sliced the model in Cura using these settings: Line Height: 2.5mm Initial Line Height: 2.5mm Wall Thickness: 1mm Top/Bottom Thickness: .8mm How I Designed This I...

We've trimmed down the design to fit on a standard Flashforge/Prusa/Wanhao/CTC/replicator build plate, aligning with my earlier Storm Trooper helmet and Episode 7 helmet designs, both of which have been printed approximately 70 times by fans...

Printer Settings CTC Replicator Dual Rafts: Yes Supports: No Resolution: 0.2 Infill: 100% Notes: No supports were necessary since they were already included in the STL. ...I print with rafts just to make removal from the heated bed easier, but it's not...

Update 23.03.16 Added V2 Version Using Rubber/Spring Between Shafts Tighten One Shaft to Rods with M3s, Leave Second Shaft Loose for Easy Filament Spool Swapping Without Screwdriver Updated Rod Diameter to 17mm for More Space and Prevention of Shaft...

Printer Settings CTC Bizer Dual Rafts: No Supports: No Resolution: 0.2mm Infill: At least 40% Post-Printing Instructions If using the 'no handle' version, tap the hole with a M5 tap and then screw in a 25cm length of M5 rod. Using this device...

The following 3D printers are supported: Cupcake, Thing-o-Matic, Replicator 1, Replicator 2/2X, Clone R1 line, Avatar/QiDi line, CTC line, FlashForge Creator line, MBot3D line, WanHao Duplicator 4 line, ZYYX line, and other Replicator 1 and 2...

I'm currently constructing a new generation CTC 3D Printer based on the 4040 Bosch profile. The planning phase is underway, and all parts will be printed using PETG. To confirm the Y-axis stability, I'll employ a sturdy 4mm metal plate. This...

... it tight with a 3mm zip-tie. Print it lying flat just like in the stl-file. Use either PLA or TPU for the best results. Printer Settings: * Printer: ctc * Rafts: No * Supports: No * Resolution: 0.02mm * Infill: 50-60% * Notes: Printed with PLA

**Print Settings:** For optimal results, use the following settings when printing out this replacement part: * **Printer:** CTC 3D * **Rafts:** No need for a raft, as this component will sit flush against the surrounding surface. * **Supports:**...

Print Settings: Printer: CTC Bizer Dual Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Notes: I used supports on the left and right rear panels only, as they have two levels to accommodate the thicker lower rear area of the screen. ...The front...

Print Settings Printer: CTC Bizer Rafts: No Supports: Yes Resolution: 50 Micron Infill: 25% Notes: My brother printed this with PLA on a Kapton tape using Elmer's glue and it worked incredibly. I'm confident it could also be done in ABS, but he...

ALSO i have finally got rid of the warping on my CTC machine - i tried all temps and glass plates e.t.c. and then i just covered the sides and front with see through cling wrap to stop the draft and i have had no probs with warping - in fact my only...

It is compatible with Cupcake, Thing-o-Matic, Replicator 1, Replicator 2/2X, Clone R1 line, Avatar/QiDi line, CTC line, FlashForge Creator line, MBot3D line, WanHao Duplicator 4 line, ZYYX line, and other Replicator 1 and 2 clones. The firmware took...