ender hydra 3d models
67860 3d models found related to ender hydra.thingiverse
Hydra Rear and Side mount plate remixed to fit Ender 6. ...Other parts can be found at https://www.thingiverse.com/thing:4062242
thingiverse
... and found [quantumfrenzy74](https://www.thingiverse.com/quantumfrenzy74)'s awesome design so used it as a starting point. This is modified to work with the [Hydra](https://www.thingiverse.com/thing:4062242) system on an Ender 5. Enjoy! ...
prusaprinters
Super Simple. 04.02.2021 added version update, removed unnecessary components, part became more compact Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.16 Infill: 100% Filament: НИТ PET-G Black Notes:...
prusaprinters
This is a remix of my own design, this attaches right under the previous mount for the fan, but you're going to need the M3 bolts to be a bit longer than the previous ones. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: ...
thingiverse
Moved 1 hole to fit the Creality Ender 3 V2 backplate. ...Tested and fitted. This is a remix of the Hydra from BoothyBoothy. ... https://www.thingiverse.com/thing:4062242
thingiverse
Clip On Euclid Mount for Hydra Microswiss Ender 3 Noctua nf-a4x20. Offsets= X0 Y28.753 Z-4.15 *Edit* V2 - Uploaded an updated version that is easier to remove if needed but still held in place firmly. V3 - Moved main body slightly...
thingiverse
Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple. ... 04.02.2021 added version update, removed unnecessary components, part became more compact
thingiverse
Just a simple little infill piece to add to the Hydra Tool Change System. ...For some reason Thingiverse won't let me search of the original thingy and make this a remix but the link to it is this: https://www.thingiverse.com/thing:4062242 I've made...
thingiverse
Adapter for the Ender 3 to allow mounting of Sherpa Mini while using a cable chain. ...Requires 2 3x5x4 heat inserts.
thingiverse
Ender 3 v2 Modifications for the Hydra Includes: + E3V2 variants of rear and side brackets (threaded insert variant) + Modified Narrow default ducts with built in BLTouch 3.1 mount hugging the left side + Flat Hydra tool plate head for when using...
prusaprinters
Ender 3 v2 Modifications for the Hydra Includes: E3V2 variants of rear and side brackets (threaded insert variant) Modified Narrow default ducts with built in BLTouch 3.1 mount hugging the left side Flat Hydra tool plate head for when using cables...
thingiverse
This is a remix of my own design, this attaches right under the previous mount for the fan, but you're going to need the M3 bolts to be a bit longer than the previous ones.
thingiverse
... listed. ...I wanted a side mount for my ender 3 proand to keed it at original spot UPDATE I prefered redesigning the side mount duct to allow the installation of the original bl touch mount for the ender 3 pro https://www.thingiverse.com/thing:5156237
thingiverse
I'm too dependent on my Hydra v6 toolhead, I couldn't upgrade my x-axis to use a linear rail until I had worked out a way to use it with joinatividad's V2 remix. ... This worked out perfectly for me, hopefully it holds up.
thingiverse
sherpa motor mount made for my ender 3 v2 unknown if it works with anything else uses two heat set inserts for motor mounts
thingiverse
Ender 5 / CR10 users: I don't own these printers and there are no accurate CAD models of them. Be sure to let people know in the comments what does and does not work. I know the original thing had a bracket specifically for the Ender 5. This is...
thingiverse
This is an adapter plate that allows the [Micro Swiss Direct Drive Hydra Fan Duct EZABL BLTouch](https://www.thingiverse.com/thing:4325648) design from Akanar to be used with Creality Ender 5 printers. It's a combination of the backplate in Akanar's...
thingiverse
Ender 6 Front Facing BMG mount for Hydra mod. ...Remixed from https://www.thingiverse.com/thing:4062242
thingiverse
This is a remix of Boothy's [Hydra Fan Duct & Tool Change V6 Edition](https://www.thingiverse.com/thing:4253359) with a couple of modifications to fit the Ender 3 V2. The **rear duct base** and **side duct mount** was originally designed for the...
thingiverse
### Overview This is a Hydra remix. https://www.thingiverse.com/thing:4062242 Thanks to Boothy Boothy for sharing the great Things. I couldn't link to the original for some reason. I'm sorry. All screw holes (except one) have been changed to...
thingiverse
EDIT:1-1-21 after i posted this and i realized the limitations of compatibility, i realized i could design a different head mount that would be compatible with all versions of the hydra (since all hydra variations use the same head mounting holes.)...
thingiverse
Version 1: "Hydra_1pc_all_press_in_nuts.stl" uses (8) M3x5x5mm Metric Threaded Brass Knurl Round Insert Nuts Version 2: The "Hydra_1pc_fan_w_press_in_nuts.stl" uses (4) M3x5x5mm Metric Threaded Brass Knurl Round Insert Nuts and (4) M3 Nylocs Version...
thingiverse
EDIT:1-1-21 after i posted this and i realized the limitations of compatibility, i realized i could design a different head mount that would be compatible with all versions of the hydra (since all hydra variations use the same head mounting holes.)...
thingiverse
Moved the hole to suit Ender 3 V2 Gantry Plate. ... Printed mine out of PETG 0.2mm Layer Height 240 degrees C 100% Infill 80mm/s Tree Support Touching Buildplate 6mm Brim for bed adhesion
cults3d
This is my remix of the hydra fan duct to fit the MicroSwiss Direct Drive Kit for Ender 5/plus. Everything should work. ... Offset X= -1 Y= -40
thingiverse
This is my remix of the hydra fan duct to fit the MicroSwiss Direct Drive Kit for Ender 5/plus. Everything should work. ... Offset X= -1 Y= -40
thingiverse
HERE IS A VIDEO OF IT ATTACHING ITSELF THE THE HOLDER https://youtu.be/SGkWohW20_c HERE IS A VIDEO OF THE PARTS IN AN EXPLODED VIEW https://youtu.be/VJodDugLh4Y ALSO FOUND HERE ON GRABCAD >...
grabcad
Still the same design and construction, and still operates and mounts to the Ender 3 as the original.Only changes small changes were madeextended the bmg mount the extruder to the hotend as it is now 6-10mm in the +direction for the y axis.Fan...
thingiverse
Remixed the BLTouch mount to fit Creality's own CR Touch model. Printed with 100% infill (because I always print parts with 100% infill but it's up to you) with support on. Use same nuts and M3 bolts as BL touch model. ... left side offsets...
thingiverse
So I've been using the original for a while now and decided it needed some improvements as well as some changes to suit my additional parts. Changes/additions are as follows all other parts remain the same as the original. Hope you all enjoy it. ...