gopro 1 4 20 adapter 3d models
1306782 3d models found related to gopro 1 4 20 adapter.grabcad
This model allows you to mount any 1/4-20 threaded camera to GoPro mounting hardware. I printed some using the STL files on my FDM home printer. ...Not the strongest way to go but it holds my light cameras just fiine.
thingiverse
Remix from https://www.thingiverse.com/thing:1238967 now comes with 1/4"-20 thread on the bottom. Also I added a version with a slimmer clamping foot, because the original screw of the GoPro Case Mount is too short for this adapter. ...Or use a longer...
grabcad
... screw mount. ... I printed the part using PETG on a Prusa printer.To create a thread for both the 1/4-20 hole and the M5 that comes with the gopro, I used brass threaded inserts from mcmaster. ... 1/4-20 Insert PN - 92395A116M5 Insert PN - 94510A045
prusaprinters
This is a quick release plate to mount a GoPro on a generic tripod with ¼"-20 threads. ...Threaded hole is 6.8mm deep and set up for 0.2mm print tolerance.The plate will accept the official GoPro quick release. Print SettingsPrinter:Ender 3 Pro w/...
thingiverse
This is a remix from an adapter to attach a cold shoe mount to 1/4-20 threaded hole. This is useful for attaching camera accessories to a tripod, selfie stick, or other camera mounts which typically use 1/4-20 threads. I designed it to put on my...
thingiverse
140mm fan to 1/4-20 (camera) adapter. I didn't have threaded inserts at the time so I designed this to use an inverted 1/4-20 flange nut. Not exactly the strongest design due to dimensional issues, but it works. Might not work on other fans;...
thingiverse
This is an adapter in order to attach a cold shoe mount to a 1/4-20 threaded hole. This is useful for attaching camera accessories to a tripod, selfie stick, or other camera mounts which typically use 1/4-20 threads. ...I designed this to attach a...
thingiverse
I picked up this anemometer from Adafruit: https://www.adafruit.com/product/1733 I plan on using a magmount adapter with a 1/4-20 screw to mount it. The anemometer base has four screw holes, so I made an adapter. The hole for the 1/4-20 is designed...
thingiverse
I designed this to work with any tripod that uses the standard 1/4"-20 threaded machine screw. ...It requires a coupling nut, such as the ones shown here: http://a.co/5ldSA0l The one I used was approximately 9.5mm across, and 22.25mm high, so...
thingiverse
osmo pocket bracket ,transfer to 1/4(need a 3/8 to 1/4) and GoPro Adapter.
thingiverse
GoPro arm to standard 1/4" - 20 UNC screw. ...Needs no supports when placed vertically in the slicer - print with 100% infill for max strenght.
thingiverse
Just a simple adapter to hold the Gopro on a Tripod. ...I choose to have a printed 3/8" mounting hole in the print, so i could ad a cheap 3/8 to 1/4 metal adapter to have a decent thread that won't easily strip out.
cults3d
Beside PLA(or petg) you will need TPU to print tyres , 2 M5 bolts and 2 GoPro 1/4-20″ Adapter one for the top of the dolly and one for the bottom where you can plu your selfie stick ! ...( GoPro 1/4-20″ Adapter as reference:...
thingiverse
With this Thing you can mount a Camera with 1/4" Screw to the GoPro System. I Made this for my Samsung 360 Camera an mount it to my Skipole - works great! ...
thingiverse
- Push nut into the GoPro adapter until it fits snug and then remove it - Put super glue down where the nut was and replace the nut to ensure it does not move - Once everything is dry put hot glue inside the adapter making sure to fill up so that...
thingiverse
It's a tripod that has a 1/4-20 thread that I just screwed the mount on and it works great! Printed with PLA at 35% with no supports. There's an Easter Egg in the middle of it so enjoy! Created the GoPro frame from UnPlayz (printed at 98% for a...
thingiverse
Slightly modified to accept a standard 1/4"-20 nut (superglue in) and to be printed without any support (max overhang = 60 degrees) I don't actually have a GoPro myself to confirm fit; I just modified 3D_CC_design's model for a friend. ...Also it was my...
cults3d
Slightly modified to accept a standard 1/4"-20 nut (superglue in) and to be printed without any support (max overhang = 60 degrees) I don't actually have a GoPro myself to confirm fit; I just modified 3D_CC_design's model for a friend. ...Also it was my...
prusaprinters
You will need a 1/4-20 UNC Nut Category: Camera
pinshape
Summary Some of the models of Microsoft's LifeCam series WebCams don't have a 1/4-20" thread adapter. So, for those of you who want to put your LifeCam on a tripod, here you go. Pretty straight forward print. I laid the mount on it's back without...
thingiverse
You will need a 1/4-20 UNC Nut Print Settings Printer Brand: RepRap Printer: P3Steel V4.0 Rafts: No Supports: Yes Resolution: 0.2 Infill: 40%
prusaprinters
You will need a 1/4-20 UNC Nut Print Settings Printer Brand: RepRap Printer: P3Steel V4.0 Rafts: No Supports: Yes Resolution: 0.2 Infill: 40% Category: Camera
thingiverse
I made this to convert the 1/4-20 UNC thread from the top of a light stand to a 3/4" PVC fitting. I screwed this to the top of the stand and put a PVC Tee fitting on it with 3/4" PVC pipe extended horizontally in each direction in order to hang a...
prusaprinters
... 0.1 mm makes perfectly good thread, that easily fits the tripod mount bolt. ...(¼-20 UNC)Other mount designs require a ¼-20 UNC nut, that is just not easily available, so I wanted to make a design, that didn't require any additional components.
myminifactory
This is an adapter to go from a 3/8-16 mic stand screw down to a 1/4-20 camera mount. ... Very light duty item.
thingiverse
This is a stubby 1/4-20 thread adapter for the Panavise suction cup camera mount. I designed this so I could install a 1" ball mount and use RAM style attachment arms. It will accept a standard 1/4-20 nut or bolt in the hex cavity. ... Also fits the...
thingiverse
This is an adapter to make a standard 1/4-20 male thread fit a 3/8-16 thread. I bought a Rode VideoMic Micro with the lyre suspension mount. I couldn't use it with my tripods, so I made this adapter for it. ...