monoprice mp select mini 3d printer v2 upgrades

I reworked my print of the original design to better fit my v2 printer and a thicker glass. The revised version is now .2mm taller and .4mm thicker along the z-axis. ...To accommodate these changes, I added clips on the back of the z-axis carriage,...

I found my print of the original was a little short, and didn't fit my version of the v2 printer, or my thicker glass. ...So I remixed this one It is .2mm taller, and .4mm thicker on the z axis Clips on the back on the z-axis carriage, as in the last...

... It was off by about 4mm so I made this new clap This is a remix of MP Select Mini X Gantry Support + Camera Mount [Reinforced and Realigned] by svideo This thing was made with Tinkercad. ...Edit it online https://www.tinkercad.com/things/fZfG1mOoDTj

Filament Guide for the Monoprice Select Mini / Malyan M200 This guide prevents filament from rubbing against the tower. ... Print Settings Printer Malyan M200 Rafts Enabled Supports Disabled Resolution 100 microns Infill 50% Density

The jigsawed together panels needed a little support because there was still some mobility in the center of the panel due to no mechanical fastening to the printer frame. Problem is, there's nothing to fasten to. So after some head scratching, I...

User decided to upgrade their system by installing a new 40mm fan to swap out the existing 35mm fan.

(And thanks to Dabeach for the original design) Print Settings Printer: Monoprice Maker Select V2 (Possibly the Wanhao Duplicator I3 V2.1) Rafts: No Supports: Yes Resolution: 0.20 Infill: 20-30% Notes: Comment for any suggestions, please! Oh and I...

Printing with TPE on my Mini Select was a challenge - lots of glue stick, slow speeds, and patience were required to get usable ones. Inspired by other designs, I used two things as references: https://www.thingiverse.com/thing:2722203 and...

Link to glass bed: https://www.amazon.ca/gp/product/B076JC232K/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: .2 Infill: 100% Filament: Solutech PLA Notes: I...

... extruder base for the MP Select Mini, perfect for printing with flexible materials. ...I've thoroughly tested it with flexible PLA. Print Settings: Printer: MP Select Mini Rafts: Disabled Supports: Not required Resolution: 0.1mm Infill: 50% density

... on the MP Select Mini to facilitate printing with ABS. ... Print Settings: Printer: MP Select Mini Rafts: Disabled Supports: Not used Resolution: 0.2mm Infill: 100% Notes: Ironically, I recommend printing this model with ABS for optimal results.

Humans can crank out prints at speeds of 75 mm per second using their trusty Monoprice Select Mini machines.

Here's my exact Monoprice Select Mini E3D V6 Mounting Adapter that boasts a "ZERO" offset setting.

By creating this camera mount, I aimed to provide a reliable platform for running Octoprint on my MP Select Mini using a Raspberry Pi Zero W and its accompanying Zero Spy Camera. ...Future upgrades include designing a custom case and arm for the Pi...

For the miniaturized MP Select Mini 3D printer, a compact spool holder is designed specifically to accommodate smaller one-pound spools of filament. ...This accessory fits Taulman3D's premium Nylon-230 material seamlessly, and it may also be compatible...

While holding the fan shroud in place with one hand, use one of the original fan mounting screws to secure the upper-left corner (in relation to facing the back of the printer) of the fan shroud to the printer chassis. 7. Repeat the last step to...

This is a replacement build plate mount for the Monoprice Mini SLA printer. My build plate mount snapped in two the other day and frustrated with waiting on Monoprice, I decided to 3D print this one myself.\r\n\r\nI beefed up some areas of the design...

Petit support pour cle BTR fourni pour réglage du plateau

Simple design for taking time lapses on your MPSM

I designed a custom cable support to match my existing articulating camera mount, which is available on Thingiverse under the ID 4161907.

I reworked the design to ensure that it would fit neatly underneath my bed. ...Additionally, I want to apologize for the poor camera quality in the photos.

This is a basic enclosure for affordable microSD card extensions available on Amazon. All files are readily accessible, allowing users to make their own customizations, but in case a remix is created, please give credit to the original creator. For...

I simply swapped out the original power supply switch placement with a convenient plug on the front side, eliminating the need for an unsightly hole in the back.

I wanted a removable back cover with out having to take the bottom off the machine. I printed this in PETG. Once it was finished. I ran some very small self tapping screws in the bottom back two holes, they act as alignment pins. For the top I...

I think there are some design improvements that could be made, but the aesthetic is definitely eye-catching. If you're looking for a more functional design, I'd recommend checking out my other fan cover designs that prioritize airflow. ...The good news...

this is a simple filament guide- made using matter control

Print Settings Printer: monoprice mp select mini Rafts: Yes Supports: Yes Resolution: .1 to .15 Infill: 10-20% Notes: I upgraded to Nema 17 motor with .05 leadscrew so your resolution will be different with stock Mini. I would go with decent...

You can read about our other mods on our Hackaday.io page located here: https://hackaday.io/project/14823-monoprice-select-mini-maximum-3d-printer-mods The differences between this mounting adapter and others you may have seen are: 1) The nozzle XY...

... disassembly and extra arms sticking out. This SCAD requires the Triangles module found here: http://www.thingiverse.com/thing:220868/ Print Settings Printer: Monoprice Select Mini Rafts: Yes Supports: Doesn't Matter Resolution: 0.2 Infill: 85%+