pla print settings 3d models

... on my Ender 5 for miniatures for maximum tensil strength and details. (Remember to set nozzle temp+5 and bed temp for your specific pla's min) Using 0.1mm This is a configuration profile and not a modelfile, however does contain a small test model.

Here is a my PLA settings for My Chiron. Note that it has a Direct drive, but with original Extruder and V5. I did replace tubing for Capricorn. Cooling is now provided by a 5015 blower fan. Note: you will need to make a Custom printer machine...

This is a G-code for a PLA Temp Tower for the Ender 3 at Standard print Quality and default settings. Sliced in Cure 4.6.1 Just downloand and print. ...Let me know what you think.

... my 3D printer (The Anycubic I3 Mega). ...The main purpose is for when other people use it they have the setting all there, and for when I forget. ... Please can you leave feedback ( constructive critisim ) as this is my first upload to MyMiniFactory.

... https://www.thingiverse.com/thing:38108/ The STL is the display base used to hold 20mm cubes (loosely). Use your slicer to modify the settings of the cube to show off different capabilities of your 3d printer. ... Modeled using fusion 360.

Settings for PLA 0.2 for more settings change layer heigth from 0.1 to 0.3, brim and supports ate will for custom background go to https://www.thingiverse.com/thing:4091968 EXTRA: S3D profiles (simplify3d) and PrusaSlicer(better) Note: Extruder...

PLA curling is generally fixed by printing colder and adding a lot of active cooling. Get a fan to blow on the tip of your nozzle if you don't have one. If you do have one, make sure it's turned on and blowing full blast. If that doesn't help, print...

... object. ... 2d on 3d after 3d prints on 2d. Instructions The hardest part of this is keeping the paper stuck to the build plate during printing. ... I've yet to come up with formula for this, but have been doing it with hairspray and binder clips.

... models 1:50 of a skyscraper and this model will be going in one of the apartments. I made it so it can be printed on it's side with no supports and hopefully good adhesion. I printed with 0.6mm nozzle, but it can be printed with 0.4mm.

... models 1:50 of a skyscraper and this model will be going in one of the apartments. I made it so it can be printed on it's side with no supports and hopefully good adhesion. I printed with 0.6mm nozzle, but it can be printed with 0.4mm.

User manual: Print all itemsPut the test print insideClose with additional wall

Hands: Infill 20 %, Speed 40mm/s, Shell Thickness 1 (Perimeters), PLA Printing Temperature for this print 195ºC & print the STL file as it is, no skirt & brim. Left Boot 1: Infill 20%, Speed 40mm/s, Shell Thickness 3 (Perimeters), no Skirt & Brim, no...

created from the .dxf file provided by BYU Reduced wall to save time and material Fillet on edges to reduce warping Adjusted the Logo Most importantly, note the following for a successful print (100% scale PLA 0.4mm nozzle): 1. perfectly level your...

... but I was inspired by this for the overall look https://www.thingiverse.com/thing:330151 and this for the hinge https://www.thingiverse.com/thing:5251186. I hope you find it as easy to print as I did, let me know your feedback in the comments.

A 3D printed water container for a science demonstration of atmospheric pressure and water tension that holds water and can be used to demonstrate the principles of atmospheric pressure and water tension in a classroom or laboratory setting. ... The...

... possible and use a 0.4mm nozzle.  Simply delete the benchy and import your own 3D file in case you want to print something else.  Special thanks to the Prusa3D discord community for helping me tune the settings to work with this filament!

Some mods I designed for the Mingda D2: https://www.thingiverse.com/thing:4659128

Fan set to 0 min, 100 max, on at 5mm. Flex PLA: 250 degrees, No fan for this lower part.PLA: 220, on at 5mm Z.No oil required for the Flex PLA for me, feeds fine at this temperature.As you can see from photos of the ones I have printed, I still have...

My daughter's water bottle looked quite terribly - I've printed a thin wrapper and used some boiling water to fit it.Print / use instructions:Scale the model to fit your needsPrint with PLA - so you can fit it to the bottle's shape using boiling...

... You can order complete kit from our website - http://3dprintler.com/product/makerbot-replicator-2x-upgrade-for-pla-prints/ Please send us your comments. Instructions Print with high resolution settings in ABS on Makerbot Replicator 2x

PLA case

This is the GIANT version of PLA Heart! ...it took nearly 30 hours to print on Rep2, enjoy. More than a remix it's just a resize! ...

Not having that on hand and needing to protect my fender from a possible dent, I redesigned the shim to be able to be printed in PLA. Once printed it can easily be attached to the hinge using some 3M VHB tape double-sided tape or if you don't have...

A bad tweak of the Planetside 2 Reaver model found here: https://www.thingiverse.com/thing:4080971 It was made to more easily print on my Ender 3 v2 in PLA

No description provided.

http://www.thingiverse.com/apps/customizer/run?thing_id=101307 Instructions Using the following options: build_plate_manual_y = 100 build_plate_manual_x = 100 number_of_keychains = 1 KeyChain_9 = KeyChain_8 = KeyChain_7 = KeyChain_6 = KeyChain_5 =...

http://www.thingiverse.com/apps/customizer/run?thing_id=101307 Instructions Using the following options: build_plate_manual_y = 100 build_plate_manual_x = 100 build_plate_selector = 0 KeyChain_9 = KeyChain_8 = KeyChain_7 = KeyChain_6 = KeyChain_5 =...

http://www.thingiverse.com/apps/customizer/run?thing_id=175150 Instructions Using the following options: font = write/orbitron.dxf line_10 = letter_spacing = 1 line_spacing = 2 slitlength = 12 slitwidth = 4 text_style = -80 fontsize = 8...

http://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: bar_shift = 7 lug_width = 0 ruler_unit = 10 font_with_style = Advent Pro (Bold) bar_length_trim = 12 bar_color = Khaki bar_thickness = 2.4...

... ...try different temperatures, infills, filaments, settings, and more with this model that will give you a good idea on what are the best settings. faster than a benchy boat and smaller details. less than half an hour to print with some settings.