anet a6 upgrades 3d models

The LCD screen of the anet a6 has been placed on top of the printer. It is a location that saves space, but it is also a bit uncomfortable to use it. Therefore, I have designed a new mount for this screen, so it is down at the bottom left side of...

I'm creating a portable case for my Anet A6 so friends can use it without disassembling it for travel purposes. This design features a wooden base plate, measuring 610 mm by 500 mm, which connects the sides and top of the case to its sturdy...

A custom spool holder mounts atop Anet A6 3D printers, consisting of two separate parts: left and right. A latch is required to securely attach this spool holder to the printer's frame. The movable sides can accommodate various widths of spools...

This compact electrical enclosure is specifically designed for Anet A6 Printers. It contains everything needed in a compact volume and can be printed directly on the printer itself. I carefully designed this entire component with the goal of...

This is a very compact electrical box for Anet A6 Printers. It contains everything that is needed in a volume and it is printable with the printer itself. I designed the whole part in tha way that the PSU fan will make a decent airflow that will...

This is a compact electronics enclosure for the Anet A6 printer. It was designed to conceal all cables and mount MOSFET transistors securely. The enclosure should be equipped with a 40mm fan to cool the electronics effectively. Behind the MOSFETs,...

Print Settings: * Printer: Anet A6 * Rafts: No * Supports: No * Resolution: .1 * Infill: 30% * Notes: Tight fit – sanding may be required after printing to achieve smooth movement. I used brute force, but printing a new fan might be necessary if...

Human: Anet A6 Lightbar for 5mm Diodes (Version with Holes) or Light Strip (Solid Version) Print Settings Printer: Anet A6 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 10% Notes: The railmount should be printed with cutouts facing...

I adapted the original design to fit the adjustable fan duct for the Anet A6 (https://www.thingiverse.com/thing:1996843), which is known as Mark I, but realized that I needed to reduce its size by almost 10mm. To improve upon this, I created a new...

Print Settings Printer: Anet A6 Rafts: No Supports: No Notes: Use 4 loops with a 0.4 diameter nozzle to make sure the walls are solid. It's ideal if your printer is reasonably well trammed (all the axis are exactly at right angles to each other) to...

I Made This for My Display Upgrade while Waiting for the New Screen to Arrive Printed on Anet A8 with PET-G Clear Filament 60 C Bed Temperature and 235 C Nozzle Temperature 20% Infill Density Buildtak Coated on the Bed for a Smooth Print Surface...

I have the Anet printer and it has a frame of the Anet A6 but with the button panel of the Anet A8. While searching among existing models to place a switch, I realized that none of them would work for me because they all had two sides and in my case...

This was designed to keep the Anet A6 Z axis level as it prints - some users of the Anet reported that the Z axis tilts during prints - mine did this too and one of the Z motors would get out of sync with the other. To tackle this, I created the...

This design draws inspiration from similar creations on Thingiverse, tailored specifically to the Anet A6. It enhances extruder resolution by 3.75 and requires a corresponding increase in extruder steps before fine-tuning. Upon printing and...

Human: Custom fan mount for Anet A6 featuring BLTouch sensor integration and X-axis cable chain attachment. All required chain components can be sourced from the original design on thingiverse.com/thing:2168268. This modification allows for full...

Chciałem, żeby też współpracowała z modyfikacją https://www.thingiverse.com/thing:2620320 Potrzebna będzie: 2x stara dysza gąbka Gwintownik M6 Można też zastosować szybkozłączkę do rurki PTFE Print Settings Printer: Anet A6 Rafts: NoSupports: Yes...

I'm excited to share this Remix of the brace for the Anet A6, as I recently discovered some errors in the .stl file that would have caused the print to fail. While not particularly dramatic, I still wanted to address these issues. Since I really...

These sockets can be installed on top of the ANET A6 printer to illuminate the heatbed. Two holes are available on the side for this purpose. To activate the light, four LEDs with 3mm diameter and one 100-ohm resistor need to be soldered in series.

This is a custom filament holder designed specifically for the Anet A6, allowing users to mount it securely on one of the cable holes in the left top support plate. A thoughtful gap has been included for the cable bundle, ensuring that cables can...

... ... Print Settings: Printer: Anet A6 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3mm Infill: 20% Notes: I added 2% extra size to account for ABS shrinkage, but it turned out too big and fits tightly on the screws. I also used brims for printing.

This is a versatile extruder light for the Anet A6 designed to illuminate the printhead during printing sessions. The part features strategically placed holes that securely hold LED cables in position using zipties. To ensure optimal performance,...

The stock Anet A6 printer fan duct falls short in several areas. It's too brief, forcing air directly onto the nozzle rather than the print surface. Having successfully implemented a Prusa i3 Mk2-style fan duct on a previous project, I designed...

Anet A6 lightbar for 5mm diodes (version with holes) or light strip (solid version) Print Settings Printer: Anet A6 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 10% Notes: The railmount should be printed with the cutouts upward. Try...

Printing Flexible Filament on the Anet A6: A Step-by-Step Guide To successfully print flexible filament on your Anet A6, it's essential to follow some key guidelines. First and foremost, ensure that your printer is calibrated correctly. This involves...

Print Settings (note these settings are with Craftware) Printer: Anet A6 Rafts: Doesn't Matter Supports: Yes Resolution: High Infill: 15% Fusion: 200 degrees C Notes: Please note that these are Craftware settings and I have no idea what they would...

Important Note: The original firmware on the Anet A6 does not support the BLTouch, and electrical modifications are necessary to integrate it properly. All parts were printed with a 0.2 layer height setting for high-quality results. PETG filament...

... 0.2 layer height, and 40% or higher infill. Printer Settings: * Printer: Anet A6 * Rafts: Doesn't Matter * Supports: Yes * Resolution: 0.2 * Infill: 40% * Notes: Use high infill, preferably 100%. ...Thin walls of 0.4 will help with support removal.

Anet A6 power switch --------------------- I created this power switch for the back of my printer because I couldn't find an existing solution to install one at the original power supply location. ### Installation The top hole of the switch is...

I had some Problems Whit the basic stiffness of the Original Anet A6. Therefore I decided to design some printable part to improve this. This ended up in an almost complete redesign of the printer. While doing so I also changed some other...

A replacement fan duct for the Audi A6, designed to fit precisely and securely. ...Simple plug-and-play installation ensures seamless integration.