flashforge creator pro e3d v6

Since I lacked any spool holders that small, I designed this mount to secure the spool on the back of my FlashForge Creator Pro. It attaches through the existing hole on the back and the original M30 nut keeps it firmly in place. With my printer...

The glass piece fits perfectly within the FlashForge Creator Pro 2016 bed, with this clip version ensuring a flush fit on all sides. By utilizing the corner nut and bolt located beneath the bed, it provides extra support and holds the clip securely...

Flashforge Creator Pro - Right Extruder only (left removed) 40mm Fan/Blower Assembly Sits proudly in the left extruder position, expertly cooling the right nozzle. Secured firmly in place by two M3 bolts on the left side of the alloy extruder rail.

I've combined two things from Thingiverse, one from thing:2268123 and another from thing:2194278, to create a mounting system for my FlashForge Creator Pro that holds a WyzeCam securely in place. To make this setup, I used the Modular Mounting...

Unfortunately, the brackets included didn't match the FlashForge Creator Pro's requirements so I modified them to fit perfectly. The top back plate had four screws securing the Z-axis assembly, which prompted me to accommodate these fasteners as...

Print Settings Printer: Flashforge Creator Pro Rafts: We chose not to include rafts on this project. Supports: This object does not require supports to maintain its shape while being printed. Resolution: The printer is set at an optimal resolution...

... that ensures unobstructed airflow... Unfortunately, I'm still facing an issue with my Flashforge Creator Pro 3D printer - the fan consistently hits the front when moved all the way forward, prompting me to go back to the drawing board once again.

**Print Settings:** **Printer:** FlashForge Creator Pro **Rafts:** No **Supports:** Yes **Resolution:** 0.1mm **Infill:** 20% **Notes:** Results may vary, but with the right conditions, this design will shine! ...Go with the flow and you'll be...

I'm currently upgrading my Flashforge Creator Pro to use a Duet Maestro control board - they're really amazing! and the new board had significantly different mounting hole placement than the original board. This handy adapter plate takes about an...

A slightly modified an duct for Flash Forge Creator 3 pro.

The Creator Pro's standard accessory is a straightforward holder designed specifically to store Allen wrenches.

Do not use this model, use the original at http://www.thingiverse.com/thing:1132756 The reason for this remix is to provide a usable model with gcode that I produced from Slic3r for my FlashForge Creator Pro. The FFCP and Slic3r do not work well...

... and simpler to attach zip ties or cable ties. It may be possible to print it without supports if your bridging capabilities are extremely well-developed. Print Settings Printer: FlashForge Creator Pro Rafts: No Supports: Yes Resolution: 0.2mm

Print settings are as follows: Printer: Flashforge Creator Pro 2016 Rafts: No Supports: Yes Resolution: 0.1 Infill: 30% Notes: ABS should be printed first, then acetone vapour the parts. The silicone will not stick to shiny surfaces. After printing,...

The default dimensions have a short SD slot that enables use with an SD socket featuring a 'push it to release' mechanism, such as the Flashforge Creator Pro. The model comes equipped with a built-in support wall, which facilitates easy printing...

By default, the dimensions of this model incorporate a compact SD slot that facilitates seamless compatibility with SD sockets equipped with a 'push-to-release' mechanism, such as those found in Flashforge Creator Pro models. One notable advantage...

Print Settings for this part are listed below: Printer model: FlashForge Creator Pro Yes, it does generate rafts during printing It doesn't have built-in support material. However, the option might not matter given that the infill density will reach...

Printer Settings: Printer Model: FlashForge Creator Pro Supported by Printer: Yes Resolution Level: 0.3 Infill Rate: 40% Notes on Printing: To get these prints done, I set all three pieces to print in 0.3mm layers with a 40% infill ratio - except...

The default dimensions boast a short SD slot that enables seamless use with an SD socket featuring a 'push to release' mechanism, like the one found in Flashforge Creator Pro. A built-in support wall is integrated into the model, allowing for...

... section for more details. Maker Bighol created his own round version dampeners for his FFCP2016 and reports that they work beautifully. Print Settings: Printer: Flashforge Creator Pro Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 100%

Print Details ------------ Printer Information ------------------ * Model: FlashForge Creator Pro * Configuration Notes: Raft Requirements * Doesn't Affect Printing Outcomes Support Structures: * Irrelevant to Successful Prints Notes for Printer...

Print Settings Printer: FlashForge Creator Pro Rafts: No Supports: No Resolution: 0.2 Infill: 0.15 Post-Printing Assembly Instructions First, print the bottom plate. Next, print the template and use it to cut out cushioning materials. Then, place...

Flashforge Creator Pro). The model has a built in support wall that enables easy printing that gives cleaner results than using automatic support generated by slicers. The wall is one extrusion wide and can easily be removed with a X-acto knife. ...Once...

I created these custom glass clips for my FlashForge Creator Pro with a heated build plate and a 1/4" thick borosilicate glass sheet. I designed them to solve the problem of the glass plate being slightly smaller than the build plate. To get started,...

Install the profile configuration files by extracting them from the Cura-Profile-Flashforge-Creator-Pro-V4.zip file into the Cura configuration folder specified above. The files must be extracted into the same folder names (definitions, extruders,...

Print Settings: Printer: FlashForge Creator Pro Rafts: No Supports: Yes Resolution: .2mm Infill: 20% Notes: Supports were only added to the drawer and infill was set to 100% for both the drawer and pegs. The drawer was printed horizontally. ...I...

The clips must be positioned strategically to avoid being hit by the nozzle.\nThe third image shows a setup where nozzle collisions with clips aren't an issue.\nPrint Settings\nPrinter: \n Flashforge Creator Pro\n \n Rafts: \n Irrelevant\n \n...

... 60mm in length and are spaced 81mm center to center. Print Settings: Printer: FlashForge Creator Pro Rafts: No Supports: Yes Resolution: 0.20mm or less Infill: 15% - 100% Notes: The model was printed upside-down with adequate support throughout.

The Creator Pro from FlashForge is a 3D printer that requires efficient cooling to maintain optimal performance. One popular solution is to install a frontal fan specifically designed for this model. This type of fan attaches directly to the front of...

This holder was created for securing spray bottles and parts at the corners of a flashforge creator pro printer. As seen here, you can insert whatever fits inside it. Instructions A corner solution was sought out to hold multiple...