ender 5 cooling duct 3d models
695913 3d models found related to ender 5 cooling duct.thingiverse
After trying several designs, I've found Mistral-E Cooling Duct (https://www.thingiverse.com/thing:3255518) which worked perfectly on my Ender 5. Still, it had some room for improvement, so I did it trying to keep the good performance: - Raised the...
thingiverse
*pictures included are from where I had clipped off the tabs on the original part to be able to use it, as i didn't want to reprint with the remix I suppose newer ender 5's are coming with a slightly different part cooling fan that has tabs that are...
thingiverse
This is a remix of the Ender 5 Cooling Duct" by McGybeer. I removed the logo. ...Also on of the parts where the screws go thru didn't fit so I removed that too
thingiverse
I found this design at: https://www.thingiverse.com/thing:3855884 The downside for my printer was that my nozzle was 3,5mm further back. This remix should fix that issue. ... Printed with tree support
thingiverse
Hope this will help https://www.thingiverse.com/thing:4369859 : not applicable to my ENDER 5 PRO https://www.thingiverse.com/thing:4593935 : applicable but scopes to big versus original concept + rough surfaces...
thingiverse
A remix of McGybeer Ender 5 Cooling duct (https://www.thingiverse.com/thing:3855884). I've used MeshMixer to offset the duct so it's nozzle centered. Also chopped few millimeters of height so it won't collide with the print. ... I also printed it...
thingiverse
This is a remixed and fixed version of the 3.5mm version to fix the errors in the file, now watertight.
cults3d
I manually put some internal supports, but it doesn't interfere with the airflow, so you can print completely without support. In the small lock that is on the outside, I also put a support manually, just remove it with a blade. ... Attention: I...
thingiverse
Some people, like me, were having trouble printing with certain types of materials, because of the supports. I did this remix, and manually placed some internal supports, however it does not interfere with the air flow, so you can print completely...
thingiverse
Using CarstenD's 'Creality Ender 3 part cooling fan duct' as inspiration (https://www.thingiverse.com/thing:3091300), I have designed a Part Cooling Fan Duct for the Ender 5. I prefer this design of duct as when it comes to printing ABS, it is far...
thingiverse
I was having trouble finding a low profile 5015 fan duct for my Ender 5. The 5 appears to have a wider extruder carriage plate than the 3, and other designs I found were either gigantic or did not clear the carriage plate. Seems to be working better...
thingiverse
REQUIRES STOCK ENDER 5 HOT END - HOT END COOLING DUCT SNAP FITS TO THE RADIATOR. SEE ORIGINAL DESIGN FOR MORE DETAILS. I only modified the Part Fan shroud model but am including the other models here from MayoOo. ... I will add photos once the duct...
thingiverse
I then made another version with cooling capability around the entire nozzle using a full circle air duct. I had some issues with the fan bracket being perpendicular to the nozzle, so I made four versions (0Deg, 2.5Deg, 5Deg, and 7.5Deg) where the...
thingiverse
The original did not fit on my Ender 5+, the tabs for the screws are a bit too thick. Also, I printed it in resin and the logo was a pain to support, so I removed it. ...I included my supported STL file for resin printing, I printed it on Elegoo Mars in...
thingiverse
Focuses cooling to the base of the nozzle without restricting the fan as much as other vents, technically requires less cooling without the spray and pray method of the stock vent. Still needs more testing. ...Happy for more feedback or variants
thingiverse
Remix of GiulianoM's cooling duct to remove the duct on the side where the thermistor and heater attach to the cooling block (I had issues where the right side duct interfered with the screw-in high-temp thermistor I am using). I also cut off the tip...
thingiverse
I also make the cooling fan work with the stock ender 5 fan ( it is pressure fit (no screws)) I also removed a "clip on" from the back of the unit as it is not needed when the device is seated. I left the top of the clip as a line up point and...
cults3d
I also make the cooling fan work with the stock ender 5 fan ( it is pressure fit (no screws)) I also removed a "clip on" from the back of the unit as it is not needed when the device is seated. I left the top of the clip as a line up point and...
thingiverse
Bauteilkühler für den Ender 5 / Ender 5 Pro Bitte Beachten es gibt zwei verschiedene Dateien je nach Druckermodell
thingiverse
This is a remix of Creality Ender 5 Part Cooling Fan Duct by ShaunTheBaa April 05, 2020 Update to version 2b adds clearance for the silicone hot end boot and improves the left hand fixings. Images to be updated shortly. I increased the size of the...
thingiverse
Re uploaded after I discovered the original version i made was 10x enlarged due to fusion360. ... removed extra tabs for fitment with the newer cooling fans. removed 90deg overhang. ...made the screw tabs slightly narrower
cults3d
Re uploaded after I discovered the original version i made was 10x enlarged due to fusion360. ... removed extra tabs for fitment with the newer cooling fans. removed 90deg overhang. ...made the screw tabs slightly narrower
thingiverse
... plate. Attn: Use a crew that is not too long otherwise it will touch the frame. Link to my direct drive mount for BMG: https://www.thingiverse.com/thing:6079570 Link to my dual 5015 fan duct for ender 5s: https://www.thingiverse.com/thing:6079533
thingiverse
Printed Parts (1 Part): 1x Cooling Duct with LED Additional Parts (3 Parts): 1x LED Chip COB 12V (Found on Ebay / See image as reference) 1x 100 Ohm Resistor [Amazon Resistor Assortment...
cults3d
This version is for the Ender 5, 5015 radial fan. The main changes are the belts have been accommodated for by moving the fan up 10mm or so, addition to the fan moving up the duct has been lengthened to adjust. As well as V-slots to fit the fan...
thingiverse
The Ender 5 will actually travel 230mm along the x-axis with the stock printhead (as well as any low profile printhead with no interference), so as long as your firmware is properly calibrated for maximum build dimensions, you should be able to print...
thingiverse
______________________________________________________________________ This is a part cooling and hotend fan duct for the Ender 5 and Ender 5 plus, however it may work on an Ender 3 or Ender 3 Pro. I wanted a fan shroud that improved part cooling...
prusaprinters
Hotend and part cooling fan for the MicroSwiss Direct Drive. It is tight in the X direction but you wont loose any build volume, Y is at 46mm not larger than stock. BL-Touch location: X: +8mm Y: -23mm Stuff needed 2x 50x50x15 Fans 6x M3x5 (if you...
thingiverse
BL-Touch location: X: +8mm Y: -23mm Stuff needed * 2x 50x50x15 Fans * 6x M3x5 (if you dont have these M3x8 will work too) * 2X M3 insert (I used Ruthex if you have something else you may want to adjust the hole size for the part cooling duct) * 2x...
myminifactory
BL-Touch location:X: +8mmY: -23mm Stuff needed 2x 50x50x15 Fans 6x M3x5 (if you dont have these M3x8 will work too) 2X M3 insert (I used Ruthex if you have something else you may want to adjust the hole size for the part cooling duct) 2x M4x23 2X...