e3d v6 direct drive anet a8

This is a mount designed specifically for use with the TronXY X5S, paired with MGN12H linear rails, BondTech BMG extruder, E3D hotend, and pancake stepper. It may also be compatible with other setups. With this mount, you'll be able to securely...

Printed in ASA Nozzle at 250º Bed at 110º Fan 0% No enclosure Very easy to print Using stock v6 3cm FAN for heatbreak. Mounts all probing sensors, stock, 18mm and BLTouch Mounting order, base, BMG+hotend, blower, sensor mount. Then mount...

... I created a version of my own using the original 4020 fan. This should work with any setup where the V6 is mounted in the extruder since it utilizes one of the extruder fasteners, just like this example at https://www.thingiverse.com/thing:3721746

Wider fan duct for Anet A8 e3s clone mount - the solution to a nagging problem: the original mount wasn't properly aligned with the nozzle. Check out this clever fix on Thingiverse: https://www.thingiverse.com/thing:2628855 Printing this mount is a...

This is my dual blower E3D/E3D V6 Clone extruder head for an Anet A8 Style Printer. I have included a BLTouch and an Inductive Sensor Mount. The Blower Cover MM is optional but I would appreciate it if you printed it and displayed it proudly. If you...

I have designed this mount to utilize (most) MK8 Extruder Anet A8 fan ducts, including Semi-Circle, Full-Circle, and Mistral designs, while also accommodating an E3D v6. Furthermore, this design provides increased visibility of the nozzle for print...

Check the source link for add-ons that should still work with this setup - the stock E3D fan works, along with the part cooling fan that came with the printer. Print Settings: Printer: Hictop Prusa i3 Clone 3DP-11-ATL Rafts: No Supports: No...

Titan Direct Extruder, a high-performance upgrade for the HyperCube 3D Printer, features BLTouch Technology for precise bed leveling and exceptional print quality.

The Human is equipped with a cutting-edge Hypercube 3D printer featuring a robust Titan direct extruder and integrated BlTouch sensor technology for precise temperature control and automatic bed leveling.

I was extremely disappointed with various available options for the Anet A8 back in the day and I desperately wanted a bowden extruder, so I discovered this: Modular E3D V6 mount (use the backplate from this one)...

... Ø3mm ist. Das notwendige Teil ist: * 1 Carbonstange außen Ø3mm/ ca. 1m Als letztes benötigt man einen E3D-V5 Hotend mit Kühler. Außerdem werden zwei 40mm Lüfter benötigt. ... Der Text beschreibt, wie die Teile zusammengebaut werden können.

You can use the M3*6mm screws that come with the CRTouch and screw them directly into the mount from the bottom just like the factory mounts (holes are 2.6mm for a self tapping fit, you may need to adjust your hole size offset in your slicer or...

This one was designed for the use of: - Titan extruder (a clone but should work OK with original one) in direct drive - E3D V6 hot end or clone. - Any Nema stepper (I use the original stepper provided with the A8) - 3D touch (a clone of BLtouch) And...

This is a revised version of TNS's E3D V6 Mount for the Anet A8, with key modifications to ensure a secure and hassle-free mounting experience. Unlike the original design, which relies on threading directly into plastic, this remix uses M3 square...

This carriage is designed to: - Replace the original carriage with maximum compatibility, allowing only the fan duct to be replaced while retaining all other original parts - Provide similar nozzle positioning, eliminating the need for firmware...

This carriage is designed to: - Replace the original carriage by providing a maximum of compatibility with original parts (you only have to replace the fan duct, all the other original parts can be used) - Provide similar positioning of the nozzle,...

I modified this model to seamlessly integrate with the E3D V6 bowden setup.

The core component is an E3D V6 Clone carrier, specifically designed for mounting on Anet A8 printers, while the addition is a precision adjustable mount for Tronxy auto-bed level sensors. I was thrilled to find this design on Thingiverse. The...

I am giving credit to IsmaelPR1 for his e3d direct mount design, which I used as inspiration for my x carriage design. His original design was unfortunately meant for 45mm rod spacing (older a8's), lacked a decent z probe mount solution (other...

Print Settings: Printer: ANET A8 Rafts: No Supports: No Resolution: 0.2 Infill: 40 Post-Printing: Quick Installation Guide This is a quick installation guide with some images for the basic steps. Step 1: After unmouting stock metal frame, screw...

I'm excited to share my E3D-V6 holder personal design. It's incredibly easy to print, with no supports required. When printing parts, it's crucial to use ABS or PETG materials. The fan duct is cleverly designed to optimize airflow directly onto the...

Adapter Plate for the E3D V6 Equipped with Inductive Sensor Part Number LJC 12 A3 5Z BX.

I edited this model to be compatible with the the E3D V6 bowden setup. ... Category: 3D Printer Parts

Prototype of BMG direct drive mounts for anet et5. I recommend using a pancake stepper motor like BMG 25mm nema17 and radiator because the motor is mounted in plastic instead of a metal carriage which transfers a lot of heat. Only for BLtouch yet.

... This one was designed with the following features: - Direct drive compatibility with Titan extruder (a clone, but should work okay with the original) or E3D V6 hot end. - Nema stepper compatibility (using the original stepper provided with the A8).

... airflow. I utilized Mistral 2.1A 4.5 (https://www.thingiverse.com/thing:2121279) as my cooling ducts, which should fit any Anet A8 fan duct in theory. ...Simply mirror one side for the other to achieve a seamless fit and optimal performance.

Ultra lightweight carriage for a titan extruder and an E3D V6 Hotend designed to deliver exceptional performance. Key Features: - Perfect weight distribution achieved by positioning the extruder stepper precisely alongside the rails. - Allows...

I'm tired of my old bowden extruder and hot end on the E12, which kept getting clogged over and over again, so I decided to upgrade to direct drive and V6 hot end! Since I already had the MGN12 linear rail installed, I created this X-Carriage to...

... . This design aims to create a lower profile cooling duct. Print settings: * Printer: Anet A8 * Rafts: No * Supports: Yes * Resolution: 0.2mm * Infill: 60-70% * Notes: For details on supports, please read through the description

E3D V6 is used, available at https://amzn.to/2PQQEoT. A fan is used, located at https://amzn.to/2NWdlGt. An autolevel sensor is installed, sourced from https://amzn.to/2yxuUb0. PLA filament is used, found at https://amzn.to/2zoEXQF. Watch the...