qidi technology new generation 3d printer x one2
2152963 3d models found related to qidi technology new generation 3d printer x one2.thingiverse
This is a copy of the nameplate on the front of the QIDI X-one2 printer. It includes an embossed logo and text which stands 1mm above the face of the nameplate. ...
thingiverse
This is a simple cover which snaps over the spool nut on the inside of the printer. It's a really, really odd thing to print, but it fits well. Made to match the style of the other QIDI parts I've printed. ...
thingiverse
My X-one2 has a black plastic cover not a "heavy metal cover" as https://www.thingiverse.com/BrayChristopher's Qidi X-one has. i made adjustments to re-center my print and added the bars to have something to grab onto & not hit the fan in front...
thingiverse
Hotend cooling fan duct for Qidi x-one2 printer. Idea from that one made by rpagyc, but with few improvements. Two side blower with Bigger, separate air duct, better air flow. Printing quality and bridging are much more better then the Qidi...
thingiverse
The fan mount on the left side is a little tight but does fit the original x-one2 fan. ... The extruder cooling fan currently only works with one bolt but i'm in the process of fixing that.
cults3d
I wanted to add a simple microswitch filament sensor to my Qidi Tech X-One2. The idea for this came from: https://all3dp.com/2/ender-3-filament-sensor-runout/ There are designs on Thingiverse, but their suitability is dependent on getting a...
thingiverse
I wanted to add a simple microswitch filament sensor to my Qidi Tech X-One2. The idea for this came from: https://all3dp.com/2/ender-3-filament-sensor-runout/ There are designs on Thingiverse, but their suitability is dependent on getting a...
thingiverse
This is a simple, lightweight x-axis stop for the QIDI X-One2 and X-One printers. You’ll need one of these if you remove the shroud that sits over the print head. I chose to ditch mine to give me better access to the extruder. ...
thingiverse
This is a PTFE tube cutting jig for the QiDi Tech X-one2 printer.
thingiverse
The Qidi X-one2 comes with a black plastic shroud which sits atop the print head. It provides two functions. First, it acts as the stop for the X-axis and second, it holds one end of the bowden tube (filament guide). I made this part to act as the...
thingiverse
This is a remix to fit the new Qidi X-One2 model without the metal handles on the side. Can be printed on 3 beds or use the "Full Holder" file to print all 3 on your bed at the same time (its about a 12 hour print all together). ... Print all three...
thingiverse
I will probably make a new part that includes the plate and upright into one part once my Ender 3 gets here, but the bed size on the X-One2 limits the size and it would be cheating to put a mod out that doesn't fit the bed of that printer. Without...
thingiverse
This adapter will enable you to use a filament spool with a [roughly] 3 inch hole on the Qudi Tech X-One2 filament spool holder that came with the printer (which has a [roughly] 2 inch hole).
thingiverse
These squares are used to level the build platform of the Qidi Tech X-one2. Print at the recommended temperatures for the filament you are using. Print at 0.2 mm layer height. These squares will only print one layer and you can use this to help level...
thingiverse
Cover plate that fits around the heated bed wires. ... This is designed to compliment the style of the QIDI z-axis 10mm plug -> https://www.thingiverse.com/thing:2237356
thingiverse
Tilt the little leg to hook it onto the underside of the handle, then plop it down onto the printer. It can migrate front-to-back on the printer, but can't slide off side-to-side. Could benefit from the addition bit of a little magnetic tape. ... ...
cults3d
I made this because I kept having jamming issues with the original spool holder that comes with the printer, and I saw a lot of complaints about it online. The pieces are designed such that they all fit together. ...The tolerance should be tight...
thingiverse
I made this because I kept having jamming issues with the original spool holder that comes with the printer, and I saw a lot of complaints about it online. The pieces are designed such that they all fit together. ...The tolerance should be tight...
thingiverse
This is a spacer for the Qidi Tech X-one2 printer that adjusts the Z-Axis stop height when using a borosilicate glass plate on top of the metal build surface. It fits snugly on the back of the Z-Axis platform in between the two metal rods. Versions...
cults3d
This is a spacer for the Qidi Tech X-one2 printer that adjusts the Z-Axis stop height when using a borosilicate glass plate on top of the metal build surface. It fits snugly on the back of the Z-Axis platform in between the two metal rods. Versions...
thingiverse
For printers that use the 6mm (4mm ID) filament tubing to support the wiring harness, like the QIDI X-One2, this presents a problem if you decide to use an alternative method of feeding filament into the extruder. For our printers, we're feeding the...
thingiverse
This is a version of BrayChristopher's Qidi Tech Filament Guide Tube that you can use if you want to replace the two little plastic ring clips entirely, and attach the filament guide with the original screws and a zip tie. I needed to do this because...
thingiverse
This is to extend the spool holder on the new 2016 QIDI Tech printers which comes with a chrome spool holders that will only work with QIDI filaments. The spool extender will allows other brands to fit such as Hatchbox. ...Print Settings Printer: QIDI...
thingiverse
I took the original concept and broke it down into three sections in order to avoid using supports. It is a much cleaner print, using less material. Part B and C, with some maneuvering, will fit on the print bed together. All objects are on...
thingiverse
I use it on my Qidi X-Pro but as other have indicated, it fits on most Qidi models and Flashforge printer models as well (as Qidi is either a Flashforge clone, or vice versa). This is a remix of https://www.thingiverse.com/thing:1557386 and it's...
myminifactory
I couldn't find any tool/accessory holders for the Qidi Tech X-one2 (found for the X-one, but it didn't fit), so I designed it from scratch. These do take a while to print. Supports are not required, but depends on the reliablity of your printer's...
thingiverse
I liked the idea of a tool holder to hang on the side of my Qidi X-one2. I found one for the original X-one, but it doesn't fit. I took the inspiration from that project to start this one from scratch. It has the same basic design, but the...
pinshape
Print Settings Printer: Qidi X-one2 Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Notes: UPDATE 4/12 @ 2pm: Finally got around to printing the Version 2, and it works and fits great. I am going to remove the little slot I made, just b/c it...
thingiverse
http://www.thingiverse.com/apps/customizer/run?thing_id=188275 Instructions Using the following options: Font = write/orbitron.dxf Type = 4 Bands = 2 Knurl_Width = 3 Font_Height = 0 Ring_Thickness = 9 Font_Cut = 1 Font_Size = 9.5 Knurl_Height = 2...