planet model project

But 100% fan power isn't necessary, so use an lower Value and take the 100% as "headroom" for bridging etc.The bed leveling is done with an single DC42 IR Sensor (I can highly recommend them). Printing and InstallationAll parts can be printed...

It's also where my model takes its name from. You can listen to the song here: My personal fascination with hares started when I borrowed a copy of Kit William's Masquerade from my local library. It was the early 80's and I was 7 or 8. I marveled...

This model is designed for pla/pet-g which does not shrink. 2) print in the orientation show in the pictures. While this does not give you 90° opposition for force vs layer lines, it does give you about 45° which is much better than 0° printing with...

http://www.thingiverse.com/apps/customizer/run?thing_id=368375 Instructions Using the following options: custom_bottom_port_x_position = 20 custom_back_camera_corner_resolution = 8 custom_bottom_fillet_resolution = 8 stencil_horizontal_position = 50...

The spring just needs to be a close fit around the knife (1/2" ID). My model of the Roland-style knife is measured from one I bought online. I guessed at what was inside the screw in part and I didn't include the bearing. Yours may be different...

While it worked OK for most things, there came a time when I was trying to print a model with steeply overhanging points and the stock cooling just wouldn't cut it. I designed this adapter to allow a standard 5015 radial fan (24 volt, 0.1 amp) to be...

I designed this model so the unused limit switch from my CR-10 Mini can be easily repurposed as a filament runout sensor. The limit switch is commonly found in Creality CR-10 and Ender 3 printers and consists of an SPDT switch mounted on a small PCB...

I designed around MD3DD’s BL Touch model and CAD data found in manuals for V1-V3. Being posted for over a month and over 250 downloads with no makes or comments, I assume all is well and have removed the Work in Progress status. ... Take a look at...

http://www.thingiverse.com/apps/customizer/run?thing_id=368375 Instructions Using the following options: custom_phone_thickness = 10 custom_back_extra_port_corner_resolution = 8 custom_bottom_fillet_radius = 1.6 custom_left_port_corner_resolution = 8...

Safe. I know that Keurig is the king in USA/Canada but it's not available outside and in the rest of the world, Nespresso have the most market part. Some model are not there, you can find more here: https://www.cgtrader.com/M600 Print...

I have not printed/tested these myself - I will remove this note when I get confirmation that everything fits correctly. lrs-350_foldingCover_front_blank.stl this one is completely blank, you can add whatever cutouts you need for components of your...

The Sketchup model has each component individually named witch Extruder it is once printed. If you make your own just keep the order of Extuders to match layout and print order. Warning! I use a purge bucket located at -10X and -20Y, on a 300mmx...

Print in the following quantities:* 6x Token Tray 1* 1x Token Tray Double* 2x Dice&ModTray* 1x LifeTokenTrackerTrayBelow the cardboard second tray I am still using the default provided model holders. I looked at the foam organizer, and into...

The model was inspired by [this map pocket on Amazon](http://a.co/5P0dMfJ), but larger and with more holes for the bungee cords. ...I have no affiliation with this product and my design was done by hand, so please don't sue me if that's your map pocket...

These elevator models have been designed with very specific fit tolerance, to make these pieces fit tightly but not too much that you can't snap them together. Here are some general considerations:Print with PLA. But they also work with PETG, ABS,...

... The bands were modeled separately so they wouldn't require supports and be stronger. I printed them on their sides and used a brim as they had less surface area. They will have to be glued. The main body and battery compartment required supports.

http://www.thingiverse.com/apps/customizer/run?thing_id=368375 Instructions Using the following options: use_mouse_ears = 0 pattern_line_thickness = 20 custom_bottom_port_corner_radius = 5 custom_back_camera_corner_resolution = 8...

This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone version of...

http://www.thingiverse.com/apps/customizer/run?thing_id=368375 Instructions Using the following options: custom_back_camera_corner_resolution = 8 stencil_horizontal_position = 50 custom_back_camera_x_position = 0 custom_top_port_corner_resolution = 8...

Merry Christmas! You will need to print: 4 ea Whirligig blades 3 ea Eccentric cams 2 ea Crossbars 2 Reindeer 2 ea Base Couplers 1 ea all other parts There is a cutaway view in the thing files called cutaway view.pdf showing how the model goes...

PLEASE WATCH  THE HOW TO VIDEO ON THE BOTTOM OF THE PAGE!!There is a very important step many people miss out on and like that the Lifesaver is not correctly  mounted into the case and will fall out eventually.The upper and lower lip needs...

And get your supports in order first, the models need a relatively precise and flat supported surfaces. <font size="3">The modification uses many parts from the original setup, but the PTFE tube must be cut, making this a non-reversable mod...

Included is a list of hardware & electronics that can be used, a number of custom designed parts, and links to other Thingiverse parts to aid in completing this as a fully functioning RC model. All parts were printed in PLA, with 25% infill, and...

Any sagging of overhangs that occur at the very top/front of the model can simply be trimmed or cleaned away after. The mount can be either just press fit (if tight enough) or glued in place into the holes on the back of the body. I recommend gluing...

This model is extremely water-resistant, highly buoyant, and accelerates quickly with my setup. I printed this on my Ender 3 using split parts for easier printing or a single part if your printer can handle the height. The hatch measures 26mm deep,...

I found models of the servo, Sharpie, and 28BYJ-48 stepper motor on GrabCAD, but didn't include them in the Fusion 360 assembly file here. The build log for my printer can be viewed here: https://openbuilds.com/builds/a-rolling-plotter.9207/ ...

and using less material) The idea is to print the markers in a different colour using the "Filament change" script (under Cura, M600 gcode, if supporter on your printer); you may also use the standard rotor-cover.stl if not interested by this version...

http://www.thingiverse.com/apps/customizer/run?thing_id=368375 Instructions Using the following options: use_pattern = 0 stencil_drawing =...

**Slicing and Printing:** I sliced the model using Cura with the settings specified in the "Print Settings" section. I printed it on an Ender 3 V2 using Sunlu PETG. I used the cubic infill pattern at 20% density to ensure structural strength. I...

http://www.thingiverse.com/apps/customizer/run?thing_id=368375 Instructions Using the following options: custom_back_extra_port_corner_radius = 5 custom_right_port_y_position = 0 custom_left_port_corner_radius = 5 custom_bottom_port_corner_radius = 5...