seemecnc rostock max v2 3d models

I couldn't find a shroud that fit my 40x40x20 blower fan, so I modified the standard shroud using the STL provided by SeeMeCNC. I designed it for a snug interference fit between the fan and shroud, which may require light sanding to get a perfect...

I designed these clamps for the RoMax V2 based on its stock machine profile, including a 10mm bottom mounting plate heater plate clearance, 7mm of bed clearance that accommodates BuildTak on top of glass, and a beveled curved edge to match the 310mm...

I designed these bed clamps for the RoMax V2 based on the stock machine profile, including the 10mm bottom mounting plate --> heater plate clearance, 7mm of bed clearance that accommodates BuildTak on top of glass, and a beveled/curved edge to...

Print Settings: Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: No Infill: 30% Notes: Printed on Rostock Max V3 with PLA How I Designed This: Remixed from http://www.thingiverse.com/thing:1664735, this design has been enhanced with...

Spool Holder for attaching with stock spool arm or wider spool arms like those from user Ron, available at https://www.thingiverse.com/thing:213252/. ...Happy Printing!

I envisioned an upgrade to the top of the hotend carriage that would give it a sleeker appearance by concealing the wires and bowden tube, so I designed a cap! This custom cap not only reuses the nuts and bolts from the stock hotend carriage but also...

I designed a spool holder for my 3D printer, requiring only the purchase of ball bearings. You can find the ones I used at http://amzn.com/B002BBICBK. To prevent jams, feed filament without twisting it. If you experience any issues or have questions,...

To fix a malfunctioning component on your printer.

I'm using a custom-fit sleeve that clicks seamlessly into the 1-inch hole where the hot end, extruder, and layer fan wires pass through. My initial attempt with the heat shrink tubing provided in the kit didn't quite pan out as I struggled to get it...

I built a useful tool for bed leveling and calibration. ...I only print the first layer, then remove the build plate and take it over to my granite slab where I create a precise height map using a trusty height gauge.

I suggest printing:\n1 shell\ngo without infill\nto minimize weight.\nthere's no need for screws,\nas functionality is all that matters.. ...\nThis 3D object originated from http://repables.com/r/212/\n\n \n \n ...

It's a versatile sleeve that easily snaps into the 1" opening where hot end, extruder, and layer fan wires are routed through. The heat shrink tubing provided with the kit didn't quite shrink enough to stay securely above the hole, so it has slipped...

Inspired by DodgeDerek's design, a revised version was created that streamlined its features and made it even more straightforward.

Users can secure arm ends more firmly by using cable ties or similar items, which also eliminates excess movement in the hot end assembly. Alternatively, attaching these clips works equally well to provide a tighter grip. ... To assemble correctly:...

The fan shroud is designed for SeeMeCNC's Rostock MAX 3D printer, facilitating efficient cooling of workpieces during printing. It accommodates a 4cm (40mm) fan, with support structures incorporated into the model. Print in your preferred material,...

This door hinge is designed specifically for the SeeMeCNC Rostock MAX, fitting seamlessly into the existing holes. To install it as a plug, simply shave off the tabs on top of the door. ...This durable hinge has proven its effectiveness over time and...

Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: No Resolution: 0.3 mm Infill: 40% Notes: Clear ABS was printed upside down with an unusually high 'shrinkage' factor. ... If your printer doesn't bridge well, consider...

These Antilash Straps are built to slide over the fork-like ends of Rostock Max V2 arms, which may also work for V1 arms since I haven't tried yet. ...The primary purpose is to minimize lash, hence they need to be printed with a Ninjaflex material or...

A test LED slope I am considering employing on my Rostock MAX printer I hope this helps! ...Let me know if you need any further assistance.

Remixed for Rostock Max V3. ...This design uses existing mounting holes for support panels so you won't need to drill into the frame of the printer.

Either way, here's a low-cost solution I baked up (literally) for your SeeMeCNC Rostock Max.\nI included v1 of the brackets since one of the images below shows them and someone may be interested in ones that are almost indestructible for other...

The given spool is designed for Rostock Max printers and can hold up to a kilogram of filament. For a one-piece customized version, visit http://www.thingiverse.com/thing:116104. This design is derived from http://www.thingiverse.com/thing:45101. ...To...

This spool fits the Rostock Max and can hold 1 kilogram of filament. You might also want to check out the one-piece custom spool at http://www.thingiverse.com/thing:116104. ...This design is a customized version of the original spool found at...

This Rostock Max tool holder boasts a top filled with hexagonal spaces that securely hold various tools like wire cutters, scissors, wrenches, pliers, glue sticks, hobby knives, and kabob skewers. The brace.stl file is printed and cup with support,...

I improved the Greg's Wade extruder for the SeeMeCNC Rostock V1 printer, as well as numerous other models designed with your holder in mind. This optimization is specifically tailored for 1.75mm filament. To proceed, print the required parts along...

This conversion kit is designed for a Rostock Max printer, allowing it to serve part-time duty as a PnP (Pick and Place) machine. Only an additional stepper port, Heater2 port, two PWM fan ports, and an always-on fan port are required. Rambo,...

I have a Rostock Max v2 from seemecnc and i had several SKR 1.4 turbo and tft 43 sets laying around so i put together a couple pieces like the magnetic removal bed probe, the fan duct/mount. i have included the marlin 2.0.x files i used for my...

This is a setup for mounting the Prometheus hot end on the SeeMeCNC Ball Joint Platform with or without the Accelerometer plate. All models (no matter how shaggy they may be) in 123D Design, including a roll-your-own size master for the Stand Off,...

I designed a mount specifically for Singh's extruder, which he created to enable printing with Ninjaflex on my Rostock Max V2. ...The extruder is available on Thingiverse at http://www.thingiverse.com/thing:488678.

A custom camera mount designed specifically for the SeeMeCNC Rostock Max. ... Its modular design enables quick attachment and detachment with minimal hassle.